Vandrasc
-
Posts
7 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by Vandrasc
-
-
12 hours ago, hugz said:
the plugins RetractWhileCombing and ScalableExtraPrime dont work anymore..
Hi @hugz, could you contact the authors of the plugins? It may be that there are no new updates for the plugins yet. I do not recall having the RetractWhileCombing in 3.5 either, what Cura version did you used before 3.6? Thanks!
-
On 10/13/2018 at 8:25 AM, KiloByte said:
Ohh!
I am stupid! I hadn't! I had changed my PC and I haven't connected UM3 with my new PC's Cura via wifi, so i just forgot to update it.
I updated the firmware after reading your reply.
Now that it has the latest stable firmware , the issue is solved.
Thank you.
Though, after updating the firmware, every time i turn on the printer, printer greets with following scary message.
But besides that it works just fine, and i haven't had any actual print failure on the machine.
I am hopeful that this message will be gone in new firmware update, which i'll be looking forward to.
Thanks again, @Vandrasc
Glad that it solved your issue ?I will inform the FW team about the second issue. Thank you for your feedback!
-
18 minutes ago, ralfg said:
I installed version 3.5.1 Beta on my Mac today.
Nothing has changed to version 3.5.0 regarding the extremely lame performance.
The software is not usable. Even the rotation of a small object, the Benchy, with the mouse happens time-delayed and jerky.
As long as the software doesn't run clean I can't test anything. This is too annoying.Mac 3.1, 2x Quadcore 3 Ghz, 32 Gb RAM, SSD HD, mac osx 10.11.6
++
ralf
Hi @ralfg , weird, that fixed my performance issue. Did you tried removing your old config. folder (simulate a clean install) and try running the last 3.5.1 beta again? Also, could you disable your network and see if that fixes the problem? Thanks
-
1 hour ago, KiloByte said:
Am I the only one who is still having below problem with Cura 3.5?
I have Ultimaker 3 extended, and I am facing this problem since Cura 3.3.1.
Currently i am using a fix, suggested by @WaldoPepper99 , on this post https://community.ultimaker.com/topic/23272-issue-with-cura-331/?do=findComment&comment=211986
I thought, it will be solved by now.
Hi, silly question but did you tried to update your firmware? An older FW version would indeed give this error. If the FW is up to date and the issue still occurs than we can investigate further what the issue could be.
Thank you!
-
Hi @hugodrengen , which printer are you using?
-
Hi, do you experience this problem with all of your models? Would you agree to share your user directory with us? It may be something in your configuration.
You can find your user folder while in Cura -> Help/Show configuration folder, you may have to zip de folder before uploading it.
Thank you!
New unintended behavior in Cura 5.7
in UltiMaker Cura
Posted
Hi @2go, could you try WeTransfer for sharing a project file? From a quick look we also think that this is caused by travel moves not being retracted, but unfortunately couldn't reproduce on any of my models, so a project file will be very helpful in this case.