Jump to content


  • Content Count

  • Joined

  • Last visited

Community Reputation

1 Neutral

Personal Information

  • Field of Work
  • Country
  • 3D printer
    UM 2+
    Custom FDM printer with Multex2Move

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. You are right, now it works. I did not transferred this file, because in the origin cura there was no folder 'images'. Thank you very much !
  2. Hello, I inserted the files for Cura 3.0.4 (Linux 64 bit) in the folders and subfolders as described in the Mark2-documentation and this Cura - version works fine. Performing the same in Cura 3.1.0 and selecting the printer Mark2 for Ultimaker2, an empty windows appears. Closing this window also the complete Cura application closes. So I cannot use Cura 3.1.0 with Mark2.
  3. Hallo, ich bin noch nicht so recht zufrieden mit dem Ergebnis mit der Quailität der Objektunterseite, die auf dem Support aufliegt. Für den Support verwende ich das Filament Polysupport bei meinem Ultimaker 2+ mit Mark2 für den zweiten Extruder. In Cura 3.04 habe ich als Dichte der Dachstruktur 100 % gewählt und das sieht auch sehr gut aus. Lediglich die darauf aufliegende Objektunterseite wird nicht so gut gedruckt, wie ich es erwarten würde. Gibt es hierfür Einstellmöglichkeiten ?
  4. Nobima


    Vielen Dank für den Hinweis !
  5. The gcode-file places the calibration-line object to far to the back end of the print bed, so the distance between the y+20 line and the y+19 line was lower than the other distances. I created a new gcode with cura with another position of the stl-objects and now it was possible to perform the calibration as described.
  6. Nobima


    Hallo, ich lade in Cura 3.04 zwei stl-Dateien. Wenn ich sie für den Mehrfachdruck zusammen positionieren möchte, werden sie automatisch auseinander geschoben, wenn sich ihre Grenzen überlagern. Wie kann ich das verhindern ?
  7. Hello, first of all, I perform the calibration. With the x-value I reached the view of the calibration.pdf, but with the y-value it is unfortunately not possible. The distance at the the -20 line is always too big an it is not possible to bring it symmetric with the +20 line on the left side of the view. I set for the offset value a multiple of 0.05 mm, but it does not help. What can I do ?
  8. Now it works as expected, Mark2 is a great development. Thank you very much !
  9. Hello, installing new Mark2 is finished. It seems all is working properly. Unfortunately printing the calibration-gcode (xy_calibration.V03.gcode), Extruder 1 works fine, Extruder 2 does not deliver filament, because its feeder does not rotate. Moving filament with extruder 2 on the display, filament is delivered as expected. Using a 24V - 400W power supply does not help. What can be the reason ?
  10. Guten Tag, ich habe alle Mark2 Elemente installiert und möchte nun die Firmware aufspielen. Tinker-Mark2-dual-17.09.hex add Tinker-Mark2 firmware V17.09 3 months ago Tinker-Mark2-expansion-board-17.09.hex add Tinker-Mark2 firmware V17.09 3 months ago Tinker-Mark2-extended-dual-17.09.hex add Tinker-Mark2 firmware V17.09 3 months ago Tinker-Mark2-extended-expansion-board-17.09.hex add Tinker-Mark2 firmware V17.09 3 months ago Welche dieser Versionen muss ich verwenden ? Dielen Dank Nobima
  11. Hello, how can I change in Cura 3.1.0 the monitor connection from /dev/ttyAMC0 to /dev/ttyUSB0 for my custom FDM printer
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!