Jump to content
Ultimaker Community of 3D Printing Experts

crazy1pilot

Dormant
  • Content Count

    10
  • Joined

  • Last visited

Community Reputation

0 Neutral

Personal Information

  • Industry
    Engineering
  1. I currently have 3.2.1 installed, I tried pretty much every version of Cura 3.x.x and Cura 2.x.x with similar issues. However, the legacy version of Cura 15.04.3 never had any issues. 15.04.3 doesn't have a lot of the features I would like to use like 3.2.1 does. I even went as far as formatting my system completely and the first program I installed was Cura 3.2.1, on its first boot up it still crashed..... I can try uninstalling 3.2.1 and clearing the directories and reinstalling again. I will report back. I would love to use Cura as my primary slicer, but its not looking
  2. Here is what was generated. Also below is the link where the full log is located. Full Log2 File
  3. Would you be able to create a post on GitHub reporting the issue? You would be able to explain the issue much better then I would. If not, I can give it a shot. I haven't been able to find any other post on this issue, but maybe I'm looking in the wrong spot.
  4. What would be the best way to try and resolve this issue? Is it even possible to fix on my end or does there need to be a Cura update? This would explain why the crashes are inconsistent in nature but always happen. Thank you for the information.
  5. Thopiekar, I downloaded Dependancy Walker and ran Cura. This is what came back, I am not sure if you have a specific command you would like me to run but I just ran a generic script. C:\>A:\Downloads\Depends22_x64\depends.exe /c /f:1 /pb /pp:1 /pg:1 /ot:Log.txt "C:\Program Files\Ultimaker Cura 3.2\Cura.exe" It returned this information below, also there is a link to the full .txt file. GetProcAddress(0x00007FF9E3EB0000 [MKL_AVX2.DLL], "mkl_lapack_ps_avx2_dgetrs_small") called from "MKL_CORE.DLL" at address 0x00007FF9E6309BF8 and returned 0x00007FF9E4582E30. Get
  6. The file is in its correct spot. if you are able to describe the steps to use a dependency walker to diagnose the issue farther I would give it a shot. I thought formatting my computer with a fresh install of Win10 Pro would fix the issue but it is still the same as before. thank you for the help.
  7. I have a feeling it is related to a graphics card issue. If and when Cura doesn't immediately crash, its easy to get it to hang up by scrolling through the Setting page fast, it cant load the settings quick enough and will crash every time. I have a: NVIDIA GeForce GTX 980 Ti Driver: 391.01 I have rolled back the a driver from April of 2017 Driver: 381.89 No luck, it still showed the same issues.
  8. Update: I have since formatted my computer with a fresh install of Win10. the first program I installed was Cura 3.2.1,, the same problem still exists and Event Viewer still shows the Qt5Qml.dll. I am not sure what to do next. I thought for sure a fresh install was going to fix my issues. I have run as Admin and Compatibility Mode nothing has helped. Same issues is still present, is there anything else I can do that would help diagnose the issue? All drivers are up to date and I have even rolled back my graphics driver to the earliest one NVidia had, no luck.
  9. Hi all, This is my first time posting to the Ultimaker forums and hopefully I am in the correct place. I have been using Cura as my primary slicer since I started 3D printing back in 2013, the last Cura build I used was the legacy version 15.04.6 and a little bit of 2.1.3 which had always worked well and I never made the move over to the newest versions of Cura. Cura 2.1.3 use to work well but sometime last year it became unstable and I continued to use 15.04.6 without issues. I decided to give the latest 3.2.1 build a go to see it no longer crashed with no luck. I
×
×
  • Create New...