Maurer

New hints: The "Monitor"-tab in Cura is somehow greyed out and there is no camera view available for most of the time. So I pressed "View Printers" which shows up a browser window with available printers. The first one had the network name of my printer and all the correct material parameters BUT the IP adress 127.0.0.1. Below is shown another printer with the same name and the correct IP adress of my real one. Here I pressed the button "add to group" (or similar) which gave me an error message, that the printer could not be added because it did not respond or so, maybe because it was currently printing. BUT afterwards the first one changed its IP to the correct one. The printer with 127... disapeared. Now the camera view works fine in browser but still not in Cura. However, using "myIP":MyPort_/_?action=stream works also fine but produces an error message every hour or so. I think there is a network related issue.

Hello everybody! I have the same problem: - Cura 3.1 most of the time is extremely slow. - start up takes around a minute and there is a delay of 5-20 s after pressing any button, even if no model is loaded. - most of the time it has 13% processor usage which is 1 of 8 threads on my Intel I7 2600 - same problem on to different PCs - connection via company network (cable) with static IP - Additional problem: camera view ("Monitor") is working only rarely, upload to UM3 Extended sometimes takes one minute or more. - updated Intel Graphics HD drivers on my Dell Optiplex 790, no result - allowed Cura in Windows firewall, no result - installed Cura 3.3 Beta without Arduino Drivers and Studio: startup is fast now, responsiveness is much better, but still lacks 1-2 seconds after any button pressed. Profiles are gone (Beta?), automatic material detection fails in cura My Cura.log ("Help"->"Show Configurations Folder") is 155 MB. It contains the word "Error" 807147 times. Should we think about it? I don't want to puplish it here, but if "Team Ultimaker" wants to have it, contact me. Many errors are like the following. (Printer IP is not 127...!!) 2018-01-08 14:02:24,766 - DEBUG - UM3NetworkPrinting.NetworkPrinterOutputDevice._onFinished [1035]: A reply from http://127.0.0.1/api/v1/printer did not have status code. 2018-01-08 14:02:24,766 - ERROR - UM3NetworkPrinting.NetworkClusterPrinterOutputDevice._onFinished [680]: After requesting [http://127.0.0.1/api/v1/printer] we got a network error [1]. Not processing anything... 2018-01-08 14:02:24,767 - DEBUG - UM3NetworkPrinting.NetworkPrinterOutputDevice._onFinished [1035]: A reply from http://127.0.0.1/api/v1/print_job did not have status code. 2018-01-08 14:02:24,767 - ERROR - UM3NetworkPrinting.NetworkClusterPrinterOutputDevice._onFinished [680]: After requesting [http://127.0.0.1/api/v1/print_job] we got a network error [1]. Not processing anything... 2018-01-08 14:02:24,767 - DEBUG - UM3NetworkPrinting.NetworkPrinterOutputDevice._onFinished [1035]: A reply from http://127.0.0.1/api/v1/printer did not have status code. 2018-01-08 14:02:24,768 - ERROR - UM3NetworkPrinting.NetworkClusterPrinterOutputDevice._onFinished [680]: After requesting [http://127.0.0.1/api/v1/printer] we got a network error [1]. Not processing anything... 2018-01-08 14:02:24,768 - DEBUG - UM3NetworkPrinting.NetworkPrinterOutputDevice._onFinished [1035]: A reply from http://127.0.0.1/api/v1/print_job did not have status code. Please help! Thank You!