3DPrinterDude

Hey guys, i still have a problem. I have a own 3dprinter ( no ultimaker ). I have already written the definitions and the other resources. When i print with one extruder everything is perfekt BUT it still have two extruder and if i start a print with two extruder it doesnt do what it should do! Because the standby temperature is 175 and i cant change it and it doesnt have enought time to heat up the nozzle while printing so i want that it is always on 200 degree i looked for a solution but nothing does this what i want. I also tested to write this in the definition: "default_material_print_temperature": { "value": "200" }, "material_print_temperature_layer_0": { "value": "material_print_temperature + 5}, "material_standby_temperature": { "value": "200" }, I hope everyone understand this, what i have written because my english is not the best Thanks for your help best regards

Hello guys, i have a problem with cura! I work for a concern and we have a 3d-printer we wrote a own definition for it and we also created a mesh in STL format. So now we created a new printer with two extruder. We also wrote a new definition for CURA. So in the Cura-System is a new printer included but when we open a file and merge the two bodys, in the preview the printer goes out of range. I will copy a few pictures in the article so you see what i mean! I hope you can help me because i sit since many houres at this problem and the hints from google are not very good because we wrote our own definition so many things are different to the normal UM3 or UMS5.