Jump to content
Ultimaker Community of 3D Printing Experts
  • Sign Up

jungle2go

Member
  • Content Count

    4
  • Joined

  • Last visited

Everything posted by jungle2go

  1. I made a small change to to the um2 firmware for my ultimaker 2. Now someone on the other side of the world wants the same change but she has an ultimaker 2+ extended. I can not find any flags in the header files to make a build for the extended.
  2. I have an Ultimaker2 with Tinkergnome software. Recently i noticed strange behavior in the preheat menu. When I set the nozzle temperature to 10 degrees in the menu and i want to reset it to 0 with G-command "M104 S0" from USB, the setting goes to 160 degrees. In another case I saw it go to 200 degrees. I don't have the latest version of Tinker. I can not update because of partly broken USB-chip. Is this a known bug? If I send "M104 S1" it works fine. My response to M115: FIRMWARE_NAME:Marlin Ultimaker2; Sprinter/grbl mashup for gen6 FIRMWARE_URL:http://github.com/Ultimaker PROTOCOL_VERSION:1.0 MACHINE_TYPE:Ultimaker EXTRUDER_COUNT:1
  3. I downloaded and flashed Tinker-MarlinUltimaker2go-HBK-17.10.1.hex for my um2go to which I added a heated bed. Are there matching config header files for this version? I noticed that the heated bed is not powered continuously. Probably because of the smaller power supply. In my situation i have separate power supply for the heated bed. I want to make a small change so that the bed is powered continuously.
×
×
  • Create New...