Hey all,
So my AA 0.4 print core in slot 1 of mu Ultimaker has been worn out I believe. I bought a new Solex Everlast kit, and started working on inserting it today. I started the print core change process, and after inserting the new Solex core into slot 1, the printer gave me a motor control error and the screen froze. So I restarted it, and then it said "An unrecognized PrintCore was inserted in the print head." The screen was frozen and I can't do anything, so I had to turn it off again. I took out the new core, and turned it back on, and it came up fine.
So I went through the Load process again, and same result - "Unrecognized PrintCore". I took it out and turned it off, and back on, back to normal. So I tried the Load process again, this time to put the original AA 0.4 core back in. I did that and now - "Unrecognized PrintCore". I tried this a couple more times, and each time the same error.
So I decided to try the Solex core in slot 2. I went through the change process, and this time the printer took the new core and accepted it like nothing! So I tried loading the good AA 0.4 core from slot 2 into slot 1, and behold, "Unrecognized PrintCore"...
So, TLDR, my printer won't accept any print core in slot 1 now, Ultimaker brand or not. Any help?