Givase

Thanks GregValiant, first we have used 3DWOX slicer but we don't like how it works and the kind of pieces we made works better with cura.

The printer is a sindoh 3DWOX 2x and the cura version is 4.12. I have followed the cura setting manual and i do no have changed any setting.

In printer settings there are not options like "Extruders Share Heater" or "Extruders Share Nozzles". The type of GCode is checked with RepRap, i see there are many types to choose and i do not know how work each one.

I have no problem to write and response in english, so i know that you understand my question. My startUp G-Code from cuda is: ;FLAVOR:RepRap ;TIME:11578 ;Filament used: 0m, 4.72374m ;Layer height: 0.2 ;MINX:75.595 ;MINY:73.336 ;MINZ:0.3 ;MAXX:152.357 ;MAXY:126.663 ;MAXZ:13.095 ;Generated with Cura_SteamEngine 4.12.1 T1 M104 S210 M109 S210 M82 ;absolute extrusion mode ;Start G-code M140 S60 M299 ;Z-Calibration M107 ;Fan off G200 ;Nozzle cleaning G21 ;Metric values G90 ;Absolute positioning G92 E-20 ;Zero the extruded length G28 ;Home M298 ;Move nozzle over bed plate G1 F800 E0 G0 Z1.0 M83 ;relative extrusion mode G1 F1800 E-6 ;LAYER_COUNT:60 ;LAYER:-6 M107 G0 F7200 X79.982 Y80.236 Z0.3 ;TYPE:SUPPORT-INTERFACE G1 F1800 E6 G1 F225 X80.37 Y79.853 E0.068 G1 X80.82 Y79.45 E0.07534 .... Thank you.

Buenos días, En el cura hay una opción de anular uno de los extrusores para la impresión, el problema es que aunque anule la otra boquilla la calienta igualmente. No se como hacer para que no lo caliente, he probado incluso de bajarle la temperatura, pero la calienta a su temperatura. Hay otra forma de anular un extrusor? Gracias