[Cura 5.1 and 5.2.1 hang then crash when attempting to save new profile, slicing fails]

The solution is that Cura does not support machines with multiple monitors!  Turn off all but 1 and it works.

 

Welcome to 2022!

[Cura 5.1 and 5.2.1 hang then crash when attempting to save new profile, slicing fails]

Several issues with new build.  Tried on Windows 10 (x64) and Windows 11 (x64)

1. Slicing will start then progress through the entire process, but when done interface resets back to "slice", no slicing performed, no preview.

2. Setting wall thickness to 5 lines still produces walls that are only 1 line wide.

2. Attempting to save a new print settings profile (and other operations that require a dialog, like Save project) causes program to hang:

Faulting application name: CuraEngine.exe, version: 1.0.0.0, time stamp: 0x63500d47
Faulting module name: ucrtbase.dll, version: 10.0.22000.1, time stamp: 0x00e78ce9
Exception code: 0xc0000409
Fault offset: 0x000000000007dd7e
Faulting process id: 0x549c
Faulting application start time: 0x01d8e8b6946c34b2
Faulting application path: C:\Program Files\Ultimaker Cura 5.2.1\CuraEngine.exe
Faulting module path: C:\Windows\System32\ucrtbase.dll
Report Id: e6130dd1-5301-4d61-9795-7d52fd0a1f44

[Cura 4.13 - Tree Support is being placed through model]

Is there also an item for supports being generated off the print bed?

[Issues with tree supports on Ender 6 Cura 4.13]

There is a backlog item for this.

[Issues with tree supports on Ender 6 Cura 4.13]

Here is a screenshot of a preview from 4.12.1:

 

And here, same model and all other settings, profile, etc. on 4.13:

 

Note the supports inside the model circled in red and the supports off the build plate circled in purple (I made a different post about this).

 

This is Ender 3, Windows 11.  Note that I see a lot of strange things with my CAD programs on Windows 11 (OpenSCAD won't even run without hanging), but I haven't had a problem with Cura before 4.13...

[Issues with tree supports on Ender 6 Cura 4.13]

I have the same priblem.  3mf attached.Inside Supports problem.3mf

[Tree Supports generated outside bed and beyond printable area]

Using 4.13, slicing a large object, I get tree supports outside the size of the bed and on top of unprintable areas.  I have not seen this in older versions.  Bug?