cmustang

Thanks, Solved the problem with this link https://support.makerbot.com/s/article/1667412437627 That goes together with your proposal. Setting should be changed from windows instead of doing it form AMD catalyst software. Thanks again and take care

Hi Slashee_the_Cow, Thanks for your reply. I don't have windows 11 but 10. I changed langage as asked. I m exactly doing what you said but in AMD catalyst software but it seems that it does not detect UltimakerCura While running (I choose the 2 executable files of cura found in its installed Cura folder and both set them to high performance), in vain. They are not listed in the recent Applications, it seems to me that the catalyst software does not detect cura when open. I can confirm this while opening the "swichable graphics application monitor". It detects fusion 360 as soon as i open it (set as well to high performance) but not cura unfortunately. Thanks for your help. If you have any further tip. Let me now.

Hi, I had the same issue before in cura 4.8 (problem in simulation of printing trajectory by layer not working) I added Cura to my AMD card setting activation and choose to maximaze performance while it is running and it worked. But when i updated to cura 5.3 it nomore works. I tried doing the same but in vain. i Have 2 graphic cards in my laptop: Intel(R) HD Graphics 4000 AMD Radeon HD 7600M Series I can run fusion 360 easily but struggle with cura 5.3.1 Can someone help plz.