Jump to content
Ultimaker Community of 3D Printing Experts
Sign in to follow this  
catalyst49

Selling my Ultimaker

Recommended Posts

Hello All,

I recently purchased an Ultimaker unit about 3 weeks ago. Assembled the entire unit and have decided that its not a fit for what I need it for. Device comes with the Ulticontroller and 2GB SD card disk for direct printing without a computer. also I have two spools of White ABS and the PLA spool it comes with as well (One ABS spool has been used only to prep the machine and other 2 are intact). I've Removed the nozzle it came with (so there are some light tool marks on the aluminum block) but have a spare that I can send with it that I had for backup. Its in perfect condition really but I just don't have the time to tinker with it really. Please let me know if you're interested. I'm in the United States and willing to ship anywhere even internationally. I will also be flexible on the price. If you message me I can send photos of the unit in full detail.

Best,

Michel

Share this post


Link to post
Share on other sites

Hello All,

I recently purchased an Ultimaker unit about 3 weeks ago. Assembled the entire unit and have decided that its not a fit for what I need it for. Device comes with the Ulticontroller and 2GB SD card disk for direct printing without a computer. also I have two spools of White ABS and the PLA spool it comes with as well (One ABS spool has been used only to prep the machine and other 2 are intact). I've Removed the nozzle it came with (so there are some light tool marks on the aluminum block) but have a spare that I can send with it that I had for backup. Its in perfect condition really but I just don't have the time to tinker with it really. Please let me know if you're interested. I'm in the United States and willing to ship anywhere even internationally. I will also be flexible on the price. If you message me I can send photos of the unit in full detail.

Best,

Michel

 

plz email data and photos to dino@email.htnet.hr

thx

Dino

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Our picks

    • Ultimaker Cura | a new interface
      We're not only trying to always make Ultimaker Cura better with the usual new features and improvements we build, but we're also trying to make it more pleasant to operate. The interface was the focus for the upcoming release, from which we would already like to present you the first glance. 
        • Like
      • 22 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies
×

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!