Jump to content

Gcode (Ulticode) zu Modell


tobiasmueller94

Recommended Posts

Posted · Gcode (Ulticode) zu Modell

Hallo zusammen

Ich hoffe ich bin hier richtig.

Ich habe einen Gcode (UltiGcode) in geschriebener form z.B. als .txt Datei.

Habe ich eine Möglichkeit diesen Code irgendwie in ein Modell zu verwandeln?

Der Code sieht ca. so aus:

;FLAVOR:UltiGCode;TIME:7819;MATERIAL:16327;MATERIAL2:0

;Layer count: 132;LAYER:0M107G0 F9000 X26.622 Y91.750 Z0.300;TYPE:SKIRTG1 F1800 X35.943 Y91.750 E1.39815G1 X35.943 Y98.848 E2.46285G1 X39.434 Y93.411 E3.43204G1 X40.502 Y91.750 E3.72825G1 X48.507 Y91.750 E4.92900G1 X48.507 Y118.250 E8.90400G1 X39.186 Y118.250 E10.30215G1 X39.186 Y111.152 E11.36685G1 X35.695 Y116.589 E12.33604G1 X34.627 Y118.250 E12.63225G1 X26.622 Y118.250 E13.83300.........................................

Für jede Hilfe wäre ich enorm Dankbar!

Vielen dank schon im voraus!

Grüsse

Tobi

  • Link to post
    Share on other sites

    • 2 weeks later...
    Posted · Gcode (Ulticode) zu Modell

    ...also der GCode enthält ja eine vollständige Beschriebung des Modells. Rein technisch gesehen, sollte es möglich sein, sich aus diesem GCode jedes belibeige CAD-File-Format zu generieren.

    Ob ers ein Program gibt, welches einem diese Arbeit abnimmt, weiss ich nicht, aber zumindest kann man sich das Modell, welches der GCode beschreibt im Webbrowser unter: http://gcode.ws/ anschauen ;)

    Thomas

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.7 stable released
        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
          • Like
        • 7 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...