UltiMaker uses functional, analytical and tracking cookies. Tracking cookies enhance your experience on our website and may also collect your personal data outside of Ultimaker websites. If you agree with the use of tracking cookies, click “I agree, continue browsing”. You can withdraw your consent at any time. If you do not consent with the use of tracking cookies, click “Refuse”. You can find more information about cookies on our Privacy and Cookie Policy page.
For retraction parameters, there can be a bit of playing around that you will want to do. You want it to essentially release pressure by pulling the filament back, however, the amount of pull and speed are things that can be a bit individualized to the part and printer. Things to consider: how hot are you running? How fast are you printing? How well is your extruder working (is it the upgraded version or the older pressure plate)? How much material are you pushing out beforehand. The hotter/faster you are running the more pressure you are going to have to relieve, which means more travel. The more you travel though, the longer it takes to do this retraction, which allows the print head to sit there idly (heating corners/creating blobs). So, I guess my quick answer for you would be if you feel confident in your machine, try bumping the speed of retraction up a bit and see if that helps. I've seen retraction amounts up to 5mm as well that have worked based up speed and temp. So if that doesn't solve it, maybe bump it up to 3-4 mm on the amount and speed up to 50 mm/s. You may try searching thingiverse for the pyramid calibration test as well as it will burn through less filament as you try your settings than your current part.
Link to post
Share on other sites
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
Recommended Posts
msurunner 2
For the top I would slow it down a bit, using the plugin to change speed/temp at height. http://forum.ultimaker.com/viewtopic.php?f=8&t=2348&start=15
For retraction parameters, there can be a bit of playing around that you will want to do. You want it to essentially release pressure by pulling the filament back, however, the amount of pull and speed are things that can be a bit individualized to the part and printer. Things to consider: how hot are you running? How fast are you printing? How well is your extruder working (is it the upgraded version or the older pressure plate)? How much material are you pushing out beforehand. The hotter/faster you are running the more pressure you are going to have to relieve, which means more travel. The more you travel though, the longer it takes to do this retraction, which allows the print head to sit there idly (heating corners/creating blobs). So, I guess my quick answer for you would be if you feel confident in your machine, try bumping the speed of retraction up a bit and see if that helps. I've seen retraction amounts up to 5mm as well that have worked based up speed and temp. So if that doesn't solve it, maybe bump it up to 3-4 mm on the amount and speed up to 50 mm/s. You may try searching thingiverse for the pyramid calibration test as well as it will burn through less filament as you try your settings than your current part.
Link to post
Share on other sites