UltiMaker uses functional, analytical and tracking cookies. Tracking cookies enhance your experience on our website and may also collect your personal data outside of Ultimaker websites. If you agree with the use of tracking cookies, click “I agree, continue browsing”. You can withdraw your consent at any time. If you do not consent with the use of tracking cookies, click “Refuse”. You can find more information about cookies on our Privacy and Cookie Policy page.
Under extrusion in S3D and "blobs" in Cura (Same modell)
Posted
· Under extrusion in S3D and "blobs" in Cura (Same modell)
As an Update:
after hours of test prints I think I found the problem, but now I need a solution for it. I tried to raise the temperature, slow down and speed up the print, tried also a higher extrusion percentage but nothing new. Then I realized that Cura don't fill the thin walls with infill but S3D does.. I turnt it off and it was much better (still not perfect and now the walls are to thin, but much better) so as a next step I start printing the outlines first and that was the a big step in the right direction.
Now the layers of the walls look normal like they should... except of the blobs I can see now because of the missing support of the outlines. -.-
But now I know for what I have to look... I have to work on the settings for the infill of the thin walls or maybe the cooling wile print them. it seems not to be the classic under extrusion!
Link to post
Share on other sites
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
Recommended Posts
Sygro 0
As an Update:
after hours of test prints I think I found the problem, but now I need a solution for it. I tried to raise the temperature, slow down and speed up the print, tried also a higher extrusion percentage but nothing new. Then I realized that Cura don't fill the thin walls with infill but S3D does.. I turnt it off and it was much better (still not perfect and now the walls are to thin, but much better) so as a next step I start printing the outlines first and that was the a big step in the right direction.
Now the layers of the walls look normal like they should... except of the blobs I can see now because of the missing support of the outlines. -.-
But now I know for what I have to look... I have to work on the settings for the infill of the thin walls or maybe the cooling wile print them. it seems not to be the classic under extrusion!
Link to post
Share on other sites