Jump to content

Plastic clinic near the bushing ultimaker 2


antonkopa

Recommended Posts

Posted · Plastic clinic near the bushing ultimaker 2

And for some reason, the plastic through the tube of the bowden can badly get into the fluoroplastic sleeve, as it strangely then gets well then it starts to clinch, exactly in the place where the plastic enters the bushing. The diameter of the tube is 4mm, the feed through the tube works well, the nozzle is not clogged, the sleeve is new.

Can jam immediately can at different times. :(

  • Link to post
    Share on other sites

    Posted · Plastic clinic near the bushing ultimaker 2

    Hi and welcome to the community,

    I'm sorry but i don't really understand what's happening, i suspect a google translate problem?

    Can you show pictures of your problem maybe?

  • Link to post
    Share on other sites

    Posted · Plastic clinic near the bushing ultimaker 2

    In Russian I'll try to make a picture with a problem. The problem of plastic jam before the fluoroplastic bushing

    А по какой причине пластик через трубку боудена может плохо попадать в фторопластовую втулку, как то странно то попадает хорошо то начинает клинить, именно в месте где пластик входит в втулку. Диаметр трубки 4мм, подача по трубке работает хорошо, сопло не забито, втулка новая.

    Может заклинить сразу может через разное время. :(

  • Link to post
    Share on other sites

    Posted (edited) · Plastic clinic near the bushing ultimaker 2

    Part PTFE coupler is new whole block new.

    Can this be due to the tube I have it 6mm and inside 4mm ?

    It turns out when the plastic passes through the tube and gets into the ptfe coupler all ok, but when the retract plastic from the sleeve goes out and back it may not get in as there is a gap of a couple of millimeters. Similarly, when loading, if the plastic in the hub is all ok, if not then trouble. ((

    Edited by Guest
  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...