Jump to content
Ultimaker Community of 3D Printing Experts

Problem at bottom layers with cura


Sigi7444

Recommended Posts

Posted · Problem at bottom layers with cura

Hello there,

After having changed from Slic3r to the latest version oft Cura I got a problem Witz the bottom layers.

Just to clear things up, I have already correctly set upthe distance between heat bed and nozzle so I guess the problem must be a software issue

So once i start a new print the nozzle doesnt move upwards the z axis while printing the first 20-40 layers. Therefore it stays at the same height and is just glanzing around.

And then suddenly after having finished the first 20-40 layers it starts to works properly, move upwards and just work fine.

Anyone got an idea of how to fix this?

Thanks in advance

  • Link to post
    Share on other sites
    Posted · Problem at bottom layers with cura

    Hi and welcome,

    What printer are you using? Maybe a problem with the machine settings ?

     

    Thanks for your quick answer.

    I am using the Geeetech i3 pro b.

    Which settings do you think could be the reason? I just want to mention that using Slic3r i didnt have this problem.

  • Link to post
    Share on other sites

    Archived

    This topic is now archived and is closed to further replies.

    ×
    ×
    • Create New...