Material Feeder in reverse for Ultimaker 2 Extended +.

[brian_mv 0]

I recently got an Ultimaker 2 Extended +. The material feed worked. I connected to Cura 2.5 and got firmware update. Now, the material feeds in reverse. Now the firmware version: Maintenance/version Vers:_2.4ex

I loaded Custom firmware Program Files/Cura 2.5/Resources/Firmware MarlinUltimaker2extended-plus.hex but it did not solve the problem.

I will appreciate any help getting the correct firmware or other solutions.

[brian_mv 0]

I tried firmware MarlinUltimaker2extended.hex It seems to have fixed problem. Still worrying that the name is not correct.

[ultiarjan 1,223]

The newest "plus" feeder is geared, thats why it's roting in the wrong direction if you use the incorrect firmware;

If you have this white feeder, you have an Ultimaker 2 (ext) PLUS, so you need the plus firmware;

If you have the old black feeder, like below, you need the Ultimaker (ext) firmware WITHOUT the plus in the name;

Edited May 1, 2017 by Guest