lairdb 3 Posted March 28 in Slicer errors with large nozzle (edited) I'm getting some weird slicing when using a large nozzle size; irregularities, and in some cases, outright air space. Nozzle is 1.0; layer height is 0.2. Attachment slicer1 shows irregularities in Benchy's smokestack. Slicer2 shows artifacts in the doorway arch; similar artifacts can be found in all the doors and windows. Slicer3 shows Ben (thing:2795629) with even more artifacts, including a set of layers actually completely missing in the smokestack. Edited March 28 by lairdb Share this post Link to post Share on other sites