Jump to content
UltiMaker Community of 3D Printing Experts

Cura 3.3 Startup Crash

JawzX

By JawzX
in Ultimaker Cura

 Share

Recommended Posts

JawzX

JawzX 0

Posted
Posted · Cura 3.3 Startup Crash

My problem seems a bit different than the one others have noted: Mine doesn't just disappear, it throws up the error reporting window

 

My system is Windows 10 Version 1709 build 16299.371

 

I have had Cura 3.2.1 running just fine (installed on drive E, in a remote programs folder) and downloaded the 3.3 installer to check out. The 3.3 Installer correctly saw that I had 3.2 installed and offerd to uninstall it, I'm glad I chose to keep 3.2.1, because 3.3 crashes on startup every time. I installed 3.3 to the same remote programs folder as 3.2.1 was installed in and the crash report I get is attached. This seems like a very nonsensical error to me... 

 

error traceback:

Quote

 

Traceback (most recent call last):

File "X:\3.3\build\inst\lib\python3.5\site-packages\UM\Qt\Bindings\PluginsModel.py", line 44, in __init__

File "X:\3.3\build\inst\lib\python3.5\site-packages\UM\Qt\Bindings\PluginsModel.py", line 83, in _update

File "X:\3.3\build\inst\lib\python3.5\site-packages\UM\PluginRegistry.py", line 322, in isBundledPlugin

File "ntpath.py", line 632, in commonpath

ValueError: Paths don't have the same drive

 

 

full log:

Quote

 

Thread 0x0000055c (most recent call first):

File "X:\3.3\build\inst\lib\python3.5\site-packages\UM\Backend\Backend.py", line 155 in _storeStderrToLogThread

File "threading.py", line 862 in run

File "threading.py", line 914 in _bootstrap_inner

File "threading.py", line 882 in _bootstrap

 

Thread 0x000036dc (most recent call first):

File "X:\3.3\build\inst\lib\python3.5\site-packages\UM\Backend\Backend.py", line 147 in _storeOutputToLogThread

File "threading.py", line 862 in run

File "threading.py", line 914 in _bootstrap_inner

File "threading.py", line 882 in _bootstrap

 

Thread 0x00000f60 (most recent call first):

File "E:\progs3\Ultimaker Cura 3.3\plugins\USBPrinting\USBPrinterOutputDeviceManager.py", line 66 in _updateThread

File "threading.py", line 862 in run

File "threading.py", line 914 in _bootstrap_inner

File "threading.py", line 882 in _bootstrap

 

Thread 0x00004afc (most recent call first):

File "threading.py", line 293 in wait

File "threading.py", line 424 in acquire

File "X:\3.3\build\inst\lib\python3.5\site-packages\UM\JobQueue.py", line 86 in _nextJob

File "X:\3.3\build\inst\lib\python3.5\site-packages\UM\JobQueue.py", line 116 in run

File "threading.py", line 914 in _bootstrap_inner

File "threading.py", line 882 in _bootstrap

 

Thread 0x00002558 (most recent call first):

File "threading.py", line 293 in wait

File "threading.py", line 424 in acquire

File "X:\3.3\build\inst\lib\python3.5\site-packages\UM\JobQueue.py", line 86 in _nextJob

File "X:\3.3\build\inst\lib\python3.5\site-packages\UM\JobQueue.py", line 116 in run

File "threading.py", line 914 in _bootstrap_inner

File "threading.py", line 882 in _bootstrap

 

Thread 0x000055e8 (most recent call first):

File "threading.py", line 293 in wait

File "threading.py", line 424 in acquire

File "X:\3.3\build\inst\lib\python3.5\site-packages\UM\JobQueue.py", line 86 in _nextJob

File "X:\3.3\build\inst\lib\python3.5\site-packages\UM\JobQueue.py", line 116 in run

File "threading.py", line 914 in _bootstrap_inner

File "threading.py", line 882 in _bootstrap

 

Thread 0x00004424 (most recent call first):

File "threading.py", line 293 in wait

File "threading.py", line 424 in acquire

File "X:\3.3\build\inst\lib\python3.5\site-packages\UM\JobQueue.py", line 86 in _nextJob

File "X:\3.3\build\inst\lib\python3.5\site-packages\UM\JobQueue.py", line 116 in run

File "threading.py", line 914 in _bootstrap_inner

File "threading.py", line 882 in _bootstrap

 

Thread 0x00005440 (most recent call first):

File "threading.py", line 297 in wait

File "zeroconf.py", line 1569 in wait

File "zeroconf.py", line 1153 in run

File "threading.py", line 914 in _bootstrap_inner

File "threading.py", line 882 in _bootstrap

 

Thread 0x00004b54 (most recent call first):

File "threading.py", line 297 in wait

File "zeroconf.py", line 1569 in wait

File "zeroconf.py", line 1017 in run

File "threading.py", line 914 in _bootstrap_inner

File "threading.py", line 882 in _bootstrap

 

Thread 0x00004884 (most recent call first):

File "zeroconf.py", line 946 in run

File "threading.py", line 914 in _bootstrap_inner

File "threading.py", line 882 in _bootstrap

 

Thread 0x00001bec (most recent call first):

File "threading.py", line 297 in wait

File "threading.py", line 549 in wait

File "E:\progs3\Ultimaker Cura 3.3\plugins\UM3NetworkPrinting\UM3OutputDevicePlugin.py", line 274 in _handleOnServiceChangedRequests

File "threading.py", line 862 in run

File "threading.py", line 914 in _bootstrap_inner

File "threading.py", line 882 in _bootstrap

 

Thread 0x00002b60 (most recent call first):

File "E:\progs3\Ultimaker Cura 3.3\plugins\RemovableDriveOutputDevice\RemovableDrivePlugin.py", line 61 in _updateThread

File "threading.py", line 862 in run

File "threading.py", line 914 in _bootstrap_inner

File "threading.py", line 882 in _bootstrap

 

Current thread 0x00001024 (most recent call first):

File "X:\3.3\build\inst\lib\python3.5\site-packages\cura\CrashHandler.py", line 364 in _logInfoWidget

File "X:\3.3\build\inst\lib\python3.5\site-packages\cura\CrashHandler.py", line 214 in _createDialog

File "X:\3.3\build\inst\lib\python3.5\site-packages\cura\CrashHandler.py", line 82 in __init__

File "X:\3.3\build\inst\bin\cura_app.py", line 101 in exceptHook

File "X:\3.3\build\inst\lib\python3.5\site-packages\UM\Qt\QtApplication.py", line 246 in initializeEngine

File "X:\3.3\build\inst\lib\python3.5\site-packages\cura\CuraApplication.py", line 765 in runWithGUI

File "X:\3.3\build\inst\lib\python3.5\site-packages\cura\CuraApplication.py", line 687 in run

File "X:\3.3\build\inst\bin\cura_app.py", line 141 in <module>

File "Console.py", line 24 in <module>

File "<frozen importlib._bootstrap>", line 634 in _load_backward_compatible

File "<frozen importlib._bootstrap>", line 664 in _load_unlocked

File "<frozen importlib._bootstrap>", line 958 in _find_and_load_unlocked

File "<frozen importlib._bootstrap>", line 969 in _find_and_load

File "__startup__.py", line 12 in <module>

File "<frozen importlib._bootstrap>", line 634 in _load_backward_compatible

File "<frozen importlib._bootstrap>", line 664 in _load_unlocked

File "<frozen importlib._bootstrap>", line 958 in _find_and_load_unlocked

File "<frozen importlib._bootstrap>", line 969 in _find_and_load


 

 

curacrash.PNG

    • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share
    Go to topic listing

    • Our picks

      • UltiMaker Cura 5.3 stable released

        UltiMaker Cura 5.3 stable released

        ArunC posted a topic in Ultimaker Cura,

        In this stable release, Cura 5.3 achieves yet another huge leap forward in 3D printing thanks to material interlocking! As well as introducing an expanded recommended print settings menu and lots of print quality improvements. Not to mention, a whole bunch of new printer profiles for non-UltiMaker printers!
          • Thanks
          • Like
        • 24 replies
        MariMakes

        Picked By

        MariMakes,
      • Here it is. The new UltiMaker S7

        Here it is. The new UltiMaker S7

        MariMakes posted a topic in Official news,

        The UltiMaker S7 is built on the success of the UltiMaker S5 and its design decisions were heavily based on feedback from customers.
         
         
        So what’s new?
        The obvious change is the S7’s height. It now includes an integrated Air Manager. This filters the exhaust air of every print and also improves build temperature stability. To further enclose the build chamber the S7 only has one magnetically latched door.
         
        The build stack has also been completely redesigned. A PEI-coated flexible steel build plate makes a big difference to productivity. Not only do you not need tools to pop a printed part off. But we also don’t recommend using or adhesion structures for UltiMaker materials (except PC, because...it’s PC). Along with that, 4 pins and 25 magnets make it easy to replace the flex plate perfectly – even with one hand.
         
        The re-engineered print head has an inductive sensor which reduces noise when probing the build plate. This effectively makes it much harder to not achieve a perfect first layer, improving overall print success. We also reversed the front fan direction (fewer plastic hairs, less maintenance), made the print core door magnets stronger, and add a sensor that helps avoid flooding.
         

         
        The UltiMaker S7 also includes quality of life improvements:
        Reliable bed tilt compensation (no more thumbscrews) 2.4 and 5 GHz Wi-Fi A 1080p camera (mounted higher for a better view) Compatibility with 280+ Marketplace materials Compatibility with S5 project files (no reslicing needed) And a whole lot more  
        Curious to see the S7 in action?
        We’re hosting a free tech demo on February 7.
        It will be live and you can ask any questions to our CTO, Miguel Calvo.
        Register here for the Webinar
          • Like
        • 18 replies
        MariMakes

        Picked By

        MariMakes,
      • UltiMaker Cura Alpha 🎄 Tree Support Spotlight 🎄

        Cura Alpha With New Tree Support 🎄

        MariMakes posted a topic in Ultimaker Cura,

        Are you a fan of tree support, but dislike the removal process and the amount of filament it uses? Then we would like to invite you to try this special release of UltiMaker Cura. Brought to you by our special community contributor @thomasrahm
         
        We generated a special version of Cura 5.2 called 5.3.0 Alpha + Xmas. The only changes we introduced compared to UltiMaker Cura 5.2.1 are those which are needed for the new supports. So keep in mind, this is not a sneak peek for Cura 5.3 (there are some really cool new features coming up) but a spotlight release highlighting this new version of tree supports.  
          • Like
        • 22 replies
        MariMakes

        Picked By

        MariMakes,
      View All
    ×
    ×
    • Create New...