Jump to content

Cura 3.6 scaling problem


abs

Recommended Posts

Posted · Cura 3.6 scaling problem

Hi ,

 

in Cura 3.6  ( using Windows 10)  there is a problem using the scaling function, uniform scaling disabeld.

This problem happens if you rotate the model first, e.g. by 90° ( on y  to z axis )

If you do now scaling only for y-axis, the absoulte vaule is changing for y-axis  but the %-value is changing for z-axis . Same happens for z-axis  while scaling of x axis is ok( probably depending on the intial rotation).

 

best reagrds

abs

  • Like 1
Link to post
Share on other sites

Posted · Cura 3.6 scaling problem

The scaling gizmo stays in orientation of the Cura workspace. The actual scaling is happening on the original model's x,y,z axis.

 

Wanna really mess with your head? Take original orientation, rotate 90° on an axis as you mentioned above, then rotate on the (local space axis) by any amount other than 90° *then* scale again. You will see two axis respond to the scaling.

  • Like 1
Link to post
Share on other sites

Posted · Cura 3.6 scaling problem

I know there are a lot of possible  work-arround to overcome this error.

anyway also after rotation percentage value and absolute value should not scale different axis.

see attached pictures:

a1  = orginal

a2  = rotated by 90 °

a3  = scaled

a2.jpg

a3.jpg

a1.jpg

  • Link to post
    Share on other sites

    Posted · Cura 3.6 scaling problem
    16 minutes ago, abs said:

    anyway also after rotation percentage value and absolute value should not scale different axis.

    That is why there is a difference between world space and object space.

    • Like 1
    Link to post
    Share on other sites

    Posted · Cura 3.6 scaling problem

    Could somebody please have a look at this peculiar scaling behavior (see video screenshot)?

     

    When I rotate a model in Cura 3.6 and scale it in non-uniform way, then -- after the first non uniform scaling -- just by clicking into the scale value windows it changes object sizes in strange ways. I do not think that this is the intended way...

     

    please see video: https://drive.google.com/file/d/15S9pqEQmlUNl62u6c2E2yVKTOX-D4uT-/view?usp=sharing

     

    Thx, -pl

     

    Bildschirmfoto 2018-11-28 um 17.41.41.png

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...