Jump to content
UltiMaker Community of 3D Printing Experts

Assembled Ultimaker for sale - two months old


Recommended Posts

Posted · Assembled Ultimaker for sale - two months old

I am selling an assembled Ultimaker for 1500€ (without shipping). I bought it two months ago (still under waranty). The printer is fully assembled and tuned and has the following upgrades and addons:

 

  • UltiController + 2GB sdcard
  • Better pulleys from user foehnsturm (see this thread)
  • IKEA Dioder (RGB LED lights)
  • Belt tensioners
  • Endcaps with stopper screw(s)
  • Short belt tensioners for x/y motors
  • Bowden clip
  • Nylock nuts on many parts so nothing
    comes loose due to vibration
  • Small glass plate for printing
    (no need to replace tape every few prints)

 

Included is a spool of blue filament (Ultimate Blue at ~80%). I have printed a few objects, mostly stuff for tuning. It performs very well - I have spent a lot of time adjusting and improving it. But I am a perfectionist - it is never good enough...

If you compare prices with the assembled (or kit) version on the Ultimaker store, keep in mind that their prices don't include VAT. Depending on your location you then need to add 10-20% to their prices.

Location: Germany, Hessen, Wiesbaden. You can pick it up at my place or I can ship it to you (you can choose the shipping method, insured shipping prefered).

Here are some pics:

UM front

U2

U3

U4

 

Here are some prints I made with the printer:

http://www.thingiverse.com/make:48979

http://www.thingiverse.com/make:48940

http://www.thingiverse.com/make:49605

http://www.thingiverse.com/make:48018

http://www.thingiverse.com/make:47965

http://www.thingiverse.com/make:47964

http://www.thingiverse.com/make:48273

http://www.thingiverse.com/make:48274

 

 

If you are interested, send me a personal message or an email: make (at) nicolinux.org.

Stefan

 

  • Link to post
    Share on other sites

    • 1 month later...

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.3 stable released
        In this stable release, Cura 5.3 achieves yet another huge leap forward in 3D printing thanks to material interlocking! As well as introducing an expanded recommended print settings menu and lots of print quality improvements. Not to mention, a whole bunch of new printer profiles for non-UltiMaker printers!
          • Thanks
          • Like
        • 31 replies
      • Here it is. The new UltiMaker S7
        The UltiMaker S7 is built on the success of the UltiMaker S5 and its design decisions were heavily based on feedback from customers.
         
         
        So what’s new?
        The obvious change is the S7’s height. It now includes an integrated Air Manager. This filters the exhaust air of every print and also improves build temperature stability. To further enclose the build chamber the S7 only has one magnetically latched door.
         
        The build stack has also been completely redesigned. A PEI-coated flexible steel build plate makes a big difference to productivity. Not only do you not need tools to pop a printed part off. But we also don’t recommend using or adhesion structures for UltiMaker materials (except PC, because...it’s PC). Along with that, 4 pins and 25 magnets make it easy to replace the flex plate perfectly – even with one hand.
         
        The re-engineered print head has an inductive sensor which reduces noise when probing the build plate. This effectively makes it much harder to not achieve a perfect first layer, improving overall print success. We also reversed the front fan direction (fewer plastic hairs, less maintenance), made the print core door magnets stronger, and add a sensor that helps avoid flooding.
         

         
        The UltiMaker S7 also includes quality of life improvements:
        Reliable bed tilt compensation (no more thumbscrews) 2.4 and 5 GHz Wi-Fi A 1080p camera (mounted higher for a better view) Compatibility with 280+ Marketplace materials Compatibility with S5 project files (no reslicing needed) And a whole lot more  
        Curious to see the S7 in action?
        We’re hosting a free tech demo on February 7.
        It will be live and you can ask any questions to our CTO, Miguel Calvo.
        Register here for the Webinar
          • Like
        • 18 replies
      • UltiMaker Cura Alpha 🎄 Tree Support Spotlight 🎄
        Are you a fan of tree support, but dislike the removal process and the amount of filament it uses? Then we would like to invite you to try this special release of UltiMaker Cura. Brought to you by our special community contributor @thomasrahm
         
        We generated a special version of Cura 5.2 called 5.3.0 Alpha + Xmas. The only changes we introduced compared to UltiMaker Cura 5.2.1 are those which are needed for the new supports. So keep in mind, this is not a sneak peek for Cura 5.3 (there are some really cool new features coming up) but a spotlight release highlighting this new version of tree supports.  
          • Like
        • 24 replies
    ×
    ×
    • Create New...