Tevo Flash Printer Definition

[lsaunders 0]

Hello All,

 

I have created a Cura printer definition for the Tevo Flash.

 

https://bitbucket.org/lsaunders/tevoflash-cura/src/master/

 

Instructions:

• Copy the 'resources' folder into your Cura folder (e.g. C:\Program Files\Ultimaker Cura 4.5)
   
• Open Cura and add the printer (Tevo > Tevo Flash)
  
   

Edited April 11, 2020 by lsaunders
update

[123stbn 0]

Hey!
I just wanted to thank you. I just got a Tevo Flash and used your printer definition on cura.
I have a question. Why is the machine_acceleration set on 1000 instead of 1500 or 3000  for acceleration_print and acceleration_travel?

[lsaunders 0]

You’re welcome!

 

I lowered the acceleration and jerk to achieve smoother prints.  I’ve not checked the impact on print times, but it’s probably not excessive. 
 

Cheers,

Luke

[lsaunders 0]

Updates to the 'Tevo Flash' definition for Cura 5.0.0:

https://github.com/luke-saunders/TevoFlash-Cura

 

Install:

PS>  .\Import-Printer.ps1

 

[David91 0]

On 6/13/2022 at 2:20 PM, lsaunders said:

Updates to the 'Tevo Flash' definition for Cura 5.0.0:

https://github.com/luke-saunders/TevoFlash-Cura

 

Install:

PS>  .\Import-Printer.ps1

 

Hello,

 

I wanted to add the tevo flash profile in cura, but i get the following error : 

 

 

I followed the instructions : 

 

Copy the 'resources' folder into you cura folder

 

Open cura and add the printer

 

 

Thank's for your help.

 

[lsaunders 0]

Hi @David91

 

Which version of Cura do you have?  I'll have a look and get back to you this week.

 

Cheers,

Luke

[David91 0]

Hi @lsaunders

 

I Have Cura 5.2.2

 

I Tried to go through the powershell, but here is the error i get :

 

 

 

I Tried by clicking on the ps1 file directly, a window appears and disappears immediately.

 

Then I tired enterign the commands directly.

 

I start the powershell as an administrator.

 

 

 

 

Thank's for help 😉 

 

 

 

[lsaunders 0]

Hi @David91,

 

I've updated the repo with bug fixes & updates, and refreshed the `readme.md` installation notes.

https://github.com/luke-saunders/TevoFlash-Cura

 

You can now use either the PS1 or EXE to install the printer driver files.

 

Unfortunately, I've had limited time this week and not fully tested it yet.  Have a go and let me know how it went.  

 

Cheers,

Luke