Material print temperature are ignored

[cappy0815 0]

Hi all,

 

I am quite new to the board.

My printer is a 3rd party machine but I am using Cura on a Linux System.

 

I added all my PLA filaments to the program settings.

The most important value in my opinion is the print temperature.

 

The slicer is set to "custom" and I've choosed some settings for my access.

The pre-set PLA printing temperature is never considered.

I always have to enter the material settings again ... check my desired temperature and input it manually to the slicer or change it later in GCODE.

 

What am I doing wrong ...?

 

Regards and thanks in advance

Cappy0815