Creality cp-01

[MIKE88 0]

Hi any one using Cura 4.5 and have profile for Creality cp-01 printer?

[scobner 0]

Did you get anywhere with this? I have just received my printer.

 

Thanks

 

Simon

 

[kevind 0]

Hello, @scobner and @MIKE88

 

Did you get anywhere with this? I just got a creality CP-01 and I am having problems printing from Cura V 4.6.1.

 

Essentially, any model I try to print from Cura only lays down the first layer and then the filament stops extruding, but the print head keeps going through the motions. It even makes a slight high pitched buzzing noise when this seems to happen. 

 

In contrast, I know the printer is working, because I can successfully print the stock models that came with the machine, like tuzi. Even more perplexing is that if I try to open the tuzi gcode in Cura, it says that the file is invalid.

 

Have either of you encountered this?

 

Thanks

Kevin

[YetiScout 0]

Hey @kevind,

Im having this same issue, did you ever come up with a solution for it?

 

[BioWoltran 0]

i have the same problem, did you solve it?

[Aguilulfo 0]

I have this machine too. 

Some people says that the fan generates interference; so they suggest this configuration in Cura:

 

 

It solved the proble temporary, put now it`s happening again