Jump to content

Strange stripes in cura slice


JDagrrr

Recommended Posts

Posted · Strange stripes in cura slice

When I slice this particular object, it always has these strange stripes going down the body. It also shows up on the print.  Does anyone know why its happening and how to fix it?

Thanks!

CCR10SPRO_bshroud5d - Ultimaker Cura 6_10_2020 3_23_34 PM.png

  • Link to post
    Share on other sites

    Posted · Strange stripes in cura slice

    Could you share the stl for the object, and the settings you are using? Does the pattern look identical if you zoom or move the position of the view, or does it change shape? Does the pattern disappear when you zoom in really close? The most likely explanation on first impression is that this is a 3D rendering issue (moiré pattern) because the lines are smaller than one pixel and that whatever artifacts you're seeing in the print are unrelated salmon skin effect. 

  • Link to post
    Share on other sites

    Posted (edited) · Strange stripes in cura slice

    It doesn't change shape, at least what I'm seeing, and it does look the same whatever angle, but it is harder to see in some places because of the light.

    CCR10SPRO_bshroud5d - Ultimaker Cura 6_11_2020 10_23_35 AM.png

    CCR10SPRO_bshroud5d - Ultimaker Cura 6_11_2020 10_24_35 AM.png

    CCR10SPRO_bshroud5d - Ultimaker Cura 6_11_2020 10_27_43 AM.png

    bshroud5c.stl

    Edited by JDagrrr
    want to add that it shows up on the print itself
  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...