Qidi

[Masterbowman1 0]

In the Cura menu for machine set up there are all of the popular brands but no Qidi Afast printers?

I have an Ifast machine and wondered how to set up the parameters for this?

Thanks

[hukete 0]

 You can save the zip compressed file from the below link on your computer desktop.

https://drive.google.com/file/d/1XswhH7mArmQph75t3ZKR5GFOzcEKfd3Z/view?usp=sharing

 

Then uncompressed it  and copy it on Cura configuration folder then replace the folders.

 

Reboot the Cura and you can add Qidi printer from drop-down list.

[Dr_Shred 0]

so i did what you said about adding qidi i-fast and when trying to use a different material with extruder 2 it does not engage extruder 2, extruder 1 stays engaged..

[RyanMPLS 0]

On 5/9/2023 at 12:52 PM, Dr_Shred said:

so i did what you said about adding qidi i-fast and when trying to use a different material with extruder 2 it does not engage extruder 2, extruder 1 stays engaged..

Mine is working with both.  I'm now on Cura 5.8.0 though.