Bridging/shell Settings in v.3.6

[displaynamenotallowed 2]

Asked about an issue having to do with probably resolution before and nobody had known what to do so I'm moving ahead and using a work around for stringing issues. Now I'm working on bridging settings. The filament I'm using is foaming PLA and it's a little tough to get good bridging results. I'm making progress with flow rates, speed and line angle. What I don't see is how to disable the shell in the bottom layer (s) and top or in the bridging layers known as Bridge Wall. I want my bridging to be from perimeter to perimeter without a wall or shell in between. Is this possible because I don't see any obvious setting to disable these.

[displaynamenotallowed 2]

I figured it out sorry for the bother.