1 hour ago, ahoeben said:That setting is disabled for printers that have more than one extruder enabled.
hm. I don't really see why that should be the case, but it does seem to explain it...
I suppose it may make some sense for an IDEX, where it may be harder to prevent the second moving print head from hitting an already-printed object on the bed, but for the GEETech a10/20/30/M/T's, they all share the same nozzle, so there's really no extra complexity/risk to allowing 'one-at-a-time'...
But even for an IDEX, let me try it at least. It could be made to work if one is careful about it...
1 hour ago, ahoeben said:Workaround: disable all but one extruder
How would one do that? Setting 'Number of Extruders' in Machine settings to 1 (from 8, in my case!) destructively looses any start/end gcode one might have set up, so it's not a very friendly workaround... Is there another way?
Thanx, Paul.
clarification...
Recommended Posts
ahoeben 1,981
That setting is disabled for printers that have more than one extruder enabled. Workaround: disable all but one extruder
Link to post
Share on other sites