Jump to content

UM S5 mit Materialstation - permanent Fehler Er58 Fehler bei Verbindung von Materialladefach


schmierfink

Recommended Posts

Posted · UM S5 mit Materialstation - permanent Fehler Er58 Fehler bei Verbindung von Materialladefach

Leider bricht unser UM5 regelmäßig die Drucke nach ca 1cm höhe oder später ab.

Wir bekommen dann den Fehler ER58 zuletzt "Fehler bei Verbindung von Materialladefach D mit Extruder 2. Bitte besuchen Sie ultimaker.com/ER58"

Es ist jedoch nicht immer Fach D auch nicht immer Extruder 2.

 

Kann es sein, dass die Filamentführungen oder Feeder in der Materialstation verschlissen sind oder ist das ein anderes Problem? Hat jemand einen Tipp?

Seit dem neusten Firmwareupdate zickt auch der Airmannager. Er sagt, der Lüfter dreht zu Langsam und bricht den Druck ab (ER68) - nur ein kompletter Neustart bringt die Maschine wieder zum Laufen. Der Airmanager ist jetzt abgezogen.

 

Hier der relevante Logauszug:

2023-06-05T14:10:29.978546+0000 ultimakersystem-ccbdd30075b8 StardustService[9197]: INF - stardust:33 - Attempting to connect to wss://api.ultimaker.com:443/gateway/v1/socket
2023-06-05T14:10:51.506194+0000 ultimakersystem-ccbdd30075b8 MispService[2790]: INF - mispService:162 - register decoupler_right.distance_max.0 changed to 21.007317
2023-06-05T14:10:51.546933+0000 ultimakersystem-ccbdd30075b8 MispService[2790]: INF - mispSlot:297 - MISP prefeeder 3 transition_reason is DecouplerOutOfRangeHigh(29)
2023-06-05T14:10:51.546933+0000 ultimakersystem-ccbdd30075b8 MispService[2790]: INF - mispSlot:301 - MISP prefeeder 3 previous_state is FOLLOWING (for debugging only)
2023-06-05T14:10:51.555437+0000 ultimakersystem-ccbdd30075b8 MispService[2790]: INF - mispSlot:194 - MISP prefeeder 3 state changed from FOLLOWING to ERROR
2023-06-05T14:10:51.599036+0000 ultimakersystem-ccbdd30075b8 PrinterService[1592]: ERR - controller:937 - Slot error detected: slot index 3, hotend_index 1, error_type [ERROR]
2023-06-05T14:10:51.599036+0000 ultimakersystem-ccbdd30075b8 PrinterService[1592]: INF - controller:668 - Request to start procedure: 'PAUSE_PRINT'
2023-06-05T14:10:51.628677+0000 ultimakersystem-ccbdd30075b8 PrinterService[1592]: INF - materialManager:319 - Getting material settings for: nozzle_nr[1], guid[5f9f3de0-045b-48d9-84ec-19db92be7603]
2023-06-05T14:10:51.642750+0000 ultimakersystem-ccbdd30075b8 PrinterService[1592]: INF - printJobStateProperty:79 - New print job state: printing -> pausing
2023-06-05T14:10:51.647855+0000 ultimakersystem-ccbdd30075b8 PrinterService[1592]: INF - materialStorageManager:116 - handle_paused state: pausing source: unknown
2023-06-05T14:10:51.670491+0000 ultimakersystem-ccbdd30075b8 PrinterService[1592]: INF - materialStorageManager:253 - selectSlotWithMaterial: material GUID being searched for: 5f9f3de0-045b-48d9-84ec-19db92be7603, direction 1
2023-06-05T14:10:51.705930+0000 ultimakersystem-ccbdd30075b8 PrinterService[1592]: INF - materialStorageManager:256 - Slot 0: material GUID 7e6207c4-22ff-441a-b261-ff89f166d5f9, direction 0, empty 0
2023-06-05T14:10:51.732860+0000 ultimakersystem-ccbdd30075b8 MarvinService[860]: ERR - marvinService:127 - Added Fault: <Fault: level=3 code=67 message='error on misp slot 3 for hotend 1 with material 5f9f3de0-045b-48d9-84ec-19db92be7603' data='dbus.Dictionary({dbus.String('misp_slot_name'): dbus.String('D', variant_level=1), dbus.String('display_hotend_nr'): dbus.Int32(2, variant_level=1), dbus.String('hotend_index'): dbus.Int32(1, variant_level=1), dbus.String('material_guid'): dbus.String('5f9f3de0-045b-48d9-84ec-19db92be7603', variant_level=1), dbus.String('misp_slot_index'): dbus.Int32(3, variant_level=1)}, signature=dbus.Signature('sv'))'>
2023-06-05T14:10:51.764888+0000 ultimakersystem-ccbdd30075b8 PrinterService[1592]: INF - procedure:355 - Message: 'ABORT' for procedure 'PrintProcedure(key='PRINT', outcome=None)'
2023-06-05T14:10:51.772550+0000 ultimakersystem-ccbdd30075b8 PrinterService[1592]: INF - procedure:322 - PrintProcedure(key='PRINT', outcome=None) is going to be aborted (machine:False)
2023-06-05T14:10:51.772550+0000 ultimakersystem-ccbdd30075b8 PrinterService[1592]: INF - procedureStep:161 - Aborting step: PrintFileStep(key='PRINTING') (by_machine:False)
2023-06-05T14:10:51.783157+0000 ultimakersystem-ccbdd30075b8 PrinterService[1592]: ERR - controller:913 - Halting ALL procedures
2023-06-05T14:10:51.787499+0000 ultimakersystem-ccbdd30075b8 Okuda[2620]: INFO     Okuda.DBus.PrinterServiceProxy Processing PrinterError(level: 3, code: 67, msg: 'error on misp slot 3 for hotend 1 with material 5f9f3de0-045b-48d9-84ec-19db92be7603')
2023-06-05T14:10:51.968807+0000 ultimakersystem-ccbdd30075b8 Okuda[2620]: "281032.908 qml [bootup] ErrorDialog overlay: Code,Level,text= 67 3 Fehler bei Verbindung von Materialladefach D mit Extruder 2. Bitte besuchen Sie ultimaker.com/ER58"
2023-06-05T14:10:51.968807+0000 ultimakersystem-ccbdd30075b8 Okuda[2620]: INFO     Okuda.Components.screen_saver modeChanged: Mode.Printing --> Mode.AttentionRequired
2023-06-05T14:10:51.970196+0000 ultimakersystem-ccbdd30075b8 PrinterService[1592]: INF - printerStateProperty:80 - State change: printing -> error
2023-06-05T14:10:51.970196+0000 ultimakersystem-ccbdd30075b8 PrinterService[1592]: INF - printFileStep:44 - Print procedure aborted
2023-06-05T14:10:51.970196+0000 ultimakersystem-ccbdd30075b8 PrinterService[1592]: INF - controller:618 - Setting paused state to: False
2023-06-05T14:10:51.970196+0000 ultimakersystem-ccbdd30075b8 PrinterService[1592]: INF - charonFileHandler:147 - File handler aborted.
2023-06-05T14:10:52.061065+0000 ultimakersystem-ccbdd30075b8 PrinterService[1592]: INF - timeEstimator:119 - Warning print was aborted!

d67600e2-c525-46c4-af32-49b6044b3fbe.jpg

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 beta released
        Another Cura release has arrived and in this 5.8 beta release, the focus is on improving Z seams, as well as completing support for the full Method series of printers by introducing a profile for the UltiMaker Method.
        • 1 reply
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
        • 3 replies
    ×
    ×
    • Create New...