UltiMaker uses functional, analytical and tracking cookies. Tracking cookies enhance your experience on our website and may also collect your personal data outside of Ultimaker websites. If you agree with the use of tracking cookies, click “I agree, continue browsing”. You can withdraw your consent at any time. If you do not consent with the use of tracking cookies, click “Refuse”. You can find more information about cookies on our Privacy and Cookie Policy page.
Posted
· Cura Feature Request; Print ABS on glass coating
The request to have a variable layer height in Cura seems to appear every few months... :wink: I'm pretty sure it is somewhere on Daid's roadmap.
Until then, you may write a plugin for your special purpose. Design your model in a way it contains the first layer you want to have with the thickness of your planned z step. Then your plugin should do the following with the gcode:
- correct z height for the first layer, e.g. from 0.2mm to 0.02mm (smallest possible value with an Ultimaker)
- use an G92 to define this height as 0.2mm
- use an M221 for the first layer (in the case of the example above M221 S10)
- use another M221 for the second layer to set it back to 100%
In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
Recommended Posts
Dim3nsioneer 558
The request to have a variable layer height in Cura seems to appear every few months... :wink: I'm pretty sure it is somewhere on Daid's roadmap.
Until then, you may write a plugin for your special purpose. Design your model in a way it contains the first layer you want to have with the thickness of your planned z step. Then your plugin should do the following with the gcode:
- correct z height for the first layer, e.g. from 0.2mm to 0.02mm (smallest possible value with an Ultimaker)
- use an G92 to define this height as 0.2mm
- use an M221 for the first layer (in the case of the example above M221 S10)
- use another M221 for the second layer to set it back to 100%
If you're not familiar with the gcodes, you may have a look at http://reprap.org/wiki/G-code
Information about how to write a plugin, you may find here: http://wiki.ultimaker.com/How_to_write_a_Cura_plugin
Link to post
Share on other sites