Jump to content

Probleme mit NuNus PLA


reibuehl

Recommended Posts

Posted · Probleme mit NuNus PLA

Ich habe mit meinem Ultimaker 2 leichte Probleme, das schwarze PLA von NuNus zu drucken. Die Drucke haben immer wieder Fehlstellen, die nach underextrusion aussehen und oft lösen sich die ersten Layer trotz behandlung mit dem Klebestift von der Glasplatte ab. Ich verwende bisher die Standardeinstellungen für PLA und drucke mit der Quick Print Profil "Normal Quality" in Cura 14.09.

Da ich mit dem mitgelieferten, blauen PLA von Ultimaker und auch mit ColorFabb PLA keine solchen Probleme habe, frage ich mich nun, ob es bessere Settings für das NuNus PLA gibt?

 

  • Link to post
    Share on other sites

    Posted · Probleme mit NuNus PLA

    Hi,

    Sorry i don't speak german, thanks to google translate i understand you have under extrusion with on particular brand of PLA?

    Make sure the diameter of the filament is under 3mm, the recommended size is 2.85mm for Ultimaker. Some brands sell 3mm filaments that are real 3mm filaments with some variations generally going from -0.15mm to +0.15.

    This will cause the filament to get more friction in the bowden tube and lead to underextrusion...

     

  • Link to post
    Share on other sites

    Posted · Probleme mit NuNus PLA

    Hi,

    Sorry i don't speak german, thanks to google translate i understand you have under extrusion with on particular brand of PLA?

    Make sure the diameter of the filament is under 3mm, the recommended size is 2.85mm for Ultimaker. Some brands sell 3mm filaments that are real 3mm filaments with some variations generally going from -0.15mm to +0.15.

    This will cause the filament to get more friction in the bowden tube and lead to underextrusion...

     

    The NuNus Filament is specified as diameter 3,0+/-0,15mm, roundness: 3,0+/-0,08mm, processing temp. 190°C - 210°C.

    Would it make sense to somehow lubricate the filament to lower/avoid the additional friction? If so, what would I need to use for lubrication?

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...