Cool Head Lift Gcode Help

[Labern 775]

Hi

I Know absolutely nothing about Gcode but for a part Im printing I would like the cool head lift to act a certain way.

1, I would like the Z axis to move down and have no sideways movement.

2, the cool head lift time is defined by the minimum layer time. I would like to start this feature by the minimum layer time. but also set the time that the z axis has moved away from the print.

For example: If the minimum layer time is 10 sec and it prints for 2 seconds, then cool head lift will be away for 8 seconds. I would like to be able to adjust the 8 seconds.

If i adjust the minimum layer time then the cool head lift will be start at a different part of the print and not where I want it to start.

Hope this is clear and if you can point me in the right direction that would be great.

 

[Labern 775]

Its Ok

Xisle Helped me understand the code so I can modify it manually and then he even wrote me a little python program to modify the code automatically.

All credit to him and now I can get the printer to do what I want and the quality is greatly improved.