yzorg
-
Posts
183 -
Joined
-
Last visited
-
Days Won
2
Content Type
Forums
Events
3D Prints
Posts posted by yzorg
-
-
Got it solved!
i got makerbots thermocouple now and first i wasnt shure where to hang it to the extruderboard as it had 3 lines coming from the thermocoupleboard...
later i found the thermocouple works just fine without its board. i just connected it to the thermistor +- and got correct readings of 20°C roomtemp.
-
definitely gonna try this. found some hints about that in the MB forum too
-
Hi
i got this LCD board in my stuff collection and a Ultimaker.. is there a way to combine them?
http://www.olimex.com/dev/pic-mt.html
Im not so into electronic thinkering.
It made my Ultimaker with Makerbot elektronics. Its a Makerbot motherboard 2.4 with full Interface support.
If not... is this Snootlab LCD maybe compatible with Makerbot elektronics?
Printing drom SD is not important for me but having a LCD is.
greetings
-
Im on Makerbot electronics sir.
since i dont use a Ultimaker PCB i wont be able to do what you suggest.
I know that i have to change the firmware... but not how.
-
Hello Guys
Do i Make something obvious wrong?
Im having a Ultimaker. Electronics are completely from Makerbot: Mega2560 with Motherboard v2.4, 4 Stepperdrivers v3.3, extrusion controller board v3.6(intact)
However i want a BFB Hotend to work in my machine.
now the machine connects as Thingomatic with Stepstruder MK7, Motherboard and Toolhead firmware is 3,1…
I can let the stepping motors move. now however the Toolhead does simply nothing.
Although all temperatures still set to 0 in the control Panel, im getting a read of 1023,0 sometimes 1024,0 C degrees. Heatbuildplattform works just fine...
The BFB Hotend got a 200k Thermistor in it.. more info is not available cause the guys at BFB are not that friendly. They dont want to be part of the Openscource.
For testing I tried an original 100k Makerbot thermistor attached on t+t-. which sadly doesnt change temp reads to correct values...
-
-
Hi there
i got this LCD board in my stuff collection and a Ultimaker still in building process.
http://www.olimex.com/dev/pic-mt.html
Im not so into electronic thinkering.
I dont know if and how i could hang this thing on my Ultimaker maybe one of you genious guys does..
It made my Ultimaker with Makerbot elektronics. Its a Makerbot motherboard 2.4 with full Interface support.
greetings
New design extruder Ultimaker on Thingiverse
in Third party products & modifications
Posted
Oh cool!
Is it yet possible to order one of these? or even a complete extruder part without the motor... ?
Your onlineshop still didnt had any additional stuff, like replacement hotends and pulley stuff. (the things we cant get from DIY Shops)
selfbuilding the extruder didnt work for me yet. i cant laser the 8mm wood and preserve the precision needed.
since im sitting in switzerland maybe i can purchase it directly from the company?
greetings.