Jump to content
Ultimaker Community of 3D Printing Experts

xyzlord

Member
  • Content Count

    6
  • Joined

  • Last visited

    Never

Community Reputation

0 Neutral
  1. xyzlord

    Yet another bad print

    my guess is that you are extruding to much try reducing the fill density to 40-50%.
  2. xyzlord

    communication problems

    Changing monitoring state from 'Offline' to 'Opening serial port' Connecting to: COM11 Connected to: Serial(port='COM11', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=0.1, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor Changing monitoring state from 'Opening serial port' to 'Detecting baudrate' Trying baudrate: 250000 Send: M105 Baudrate test retry: 4 Send: M105 Baudrate test retry: 3 Send: M105 Baudrate test retry: 2 Send: M105 Baudrate test retry: 1 Send: M105 Baudrate test retry: 0 Send: M105 Trying baudrate: 230400 Send: M105 Baudrate test retry: 4 Send: M105 Baudrate test retry: 3 Send: M105 Baudrate test retry: 2 Send: M105 Baudrate test retry: 1 Send: M105 Baudrate test retry: 0 Send: M105 Trying baudrate: 115200 Send: M105 Baudrate test retry: 4 Send: M105 Baudrate test retry: 3 Send: M105 Baudrate test retry: 2 Send: M105 Baudrate test retry: 1 Send: M105 Baudrate test retry: 0 Send: M105 Trying baudrate: 57600 Send: M105 Baudrate test retry: 4 Send: M105 Baudrate test retry: 3 Send: M105 Baudrate test retry: 2 Send: M105 Baudrate test retry: 1 Send: M105 Baudrate test retry: 0 Send: M105 Trying baudrate: 38400 Send: M105 Baudrate test retry: 4 Send: M105 Baudrate test retry: 3 Send: M105 Baudrate test retry: 2 Send: M105 Baudrate test retry: 1 Send: M105 Baudrate test retry: 0 Send: M105 Trying baudrate: 19200 Send: M105 Baudrate test retry: 4 Send: M105 Baudrate test retry: 3 Send: M105 Baudrate test retry: 2 Send: M105 Baudrate test retry: 1 Send: M105 Baudrate test retry: 0 Send: M105 Trying baudrate: 9600 Send: M105 Changing monitoring state from 'Detecting baudrate' to 'Closed' Changing monitoring state from 'Closed' to 'Error: No more baudrates to...' Connection closed, closing down monitor this is what happens
  3. xyzlord

    communication problems

    i seem to have some kind of communication problem with my ultimaker since the new cura (updateted from 12.08 to 12.12A). this is my communication log. "Changing monitoring state from 'Offline' to 'Opening serial port' Connecting to: COM11 Connected to: Serial(port='COM11', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=2, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor Changing monitoring state from 'Opening serial port' to 'Connecting' Recv: ?nP Recv: =?j??Jl?J%[LZ?k%aL)?&>|Y?V?n6 Recv: J?Z?z?J?z?J?J?{?X?:&?+^>H?$P|?%?%?%H%?x??+^^J??^IJO.X?+^^X?J?j?AHJ?aHJP|@_a?&&??$ M6CL Recv: IM^+ Recv: ?6L Recv: I?6XH^C??&h?H Recv: I?&(^l Recv: x? Recv: ?Zb?Jj?J?J?Hj??*' Recv: joV?F? Recv: H??J?5?-? Send: M105 Recv: ']h? Changing monitoring state from 'Connecting' to 'Closed' Connection closed, closing down monitor" i tryed upgradeing the marlin software againg but doesnt seem to make a difrence when i did. changing the baud rate from 250000 to 115200 didnt work. swamping usb ports didnt work and neither did changing the usb cable itself for anothere one. hopefully somebody knows what to do since im a bit at a dead end.
  4. xyzlord

    tube jamming

    my pla material seems to be jamming inside of the tube. this inner radius of the tube is too small which causes the material to get stuck when proper tension is set on the extruder part. it makes small dents in the pla material which cause it to get stuck in the tube.
  5. xyzlord

    problems connecting

    seemed to have been a problem with the auto-detection of the com port i use on my laptop (com11). everything seems to be fine for now. going to try my first print the next day.
  6. xyzlord

    problems connecting

    for some reason my connection between my ultimaker and my laptop seems to be unstable. when i try to get past the first run wizard in cura 12.07. i am able to connect to my ultimaker and upload the firmware but when i try to connect for testing it seems to lack connection from time to time. this problem happens randomly but on a high rate. about 4 out of 5 times when i try to connect to my ultimaker. im using windows vista as operating system
×

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!