printedman

Test 2 no MacOS version?

So what is the different between travel speed and print speed ? Thanks.

I got the speed from Cura. At the Basic setting tab," Print Speed (mm/s) 30" . Advanced Tab, Travel speed (mm/s). So which is the one am I suppose to ensure correct? Please advice, thanks.

I have change to Expert setting and in Expert config tick the Cool head lift. default setting is: Fan full on at height (mm) 1 Fan speed min (%) 100 Fan speed max (%) 100 Minimum speed (mm/s) 10 So do I need to change any setting? Please advice, thanks.

I got the speed from Cura. At the Basic setting tab," Print Speed (mm/s) 30" . Advanced Tab, Travel speed (mm/s). So which is the one am I suppose to ensure correct? Please advice, thanks.

Upgraded to Cura - 14.03-MacOS.dmg. Thank you.

Nope. How can I do that? Please advice? Thank you.

After all the great advice, my second print. Extruder Temp 210 Bed Temp 60 Travel Speed 30 Flow 100% Fill 20% Layer height 0.1 Shell thickness 0.8 2nd printing Side by Side Big improvment. Please advice how to make it better. Whats my next step. Thank you so much. :mrgreen:

Is it normal for the Ultimaker2 rear fan to come on once we on the UM2? And I can't find any detail in the UM2 manual on detail of of setting the UM2. Any Idea where can I find it? thanks

Can I cook the rice after use? :mrgreen:

Does condition in different country make a different? Is there a way to test if the ABS or PLA is bad ?

I am new to Ultimaker 2. Just starting to learn how to use it. The firmware on the UM2 is Version 14.01.2. So, should I upgrade it to 14.02? Will it complicate my learning? I am now use Cura 14.02. If I don't upgrade the firmware, will it create issue in printing? Please advice, thank you.

Where to set the temperature?

Can we tell if ABS or PLA is bad without actually printing it? I have a roll of ABS which break easily when i bend it. Is it bad?

OK. got you now. Thanks. :mrgreen:

Hi, thanks for replying. My confuse part is this: 1st round When leveling the build plate you must follow the step 4/21 until 10/21 on the display where the first step 4/21 control the height by rotating this button. to get 1mm. In the step 5/21 you rotate this left build plate screw under the build plate to control the height between the nozzle and the build plate. In 6/21 you adjust a similar build plate screw on the right hand side. 2nd round "Fine Tune" With a piece of paper. There is 3 screw below the build plate. 2 in front and 1 behind. So my question is: For this part, do I still turn the rear with the rotating button or the screw below the build plate?

My is hanging around too. :mrgreen:

1st round of the process for the rear we use the rotating button to adjust. For front left and right we use the build plate screw below it. Now for the next round "Fine Tune" front left and right same screw below the build plate. But for the rear do we use the screw below the build plate or the rotating button? Please assist, thank you.

Electric dry cabinet, like those for camera eqm. Good place for keeping our filament PLA and ABS dry n good?

Got it. Fan running. Thanks

Where is this "TUNE Menu" ?

Skint, thank you so much..

Hi, thanks for your advice. Which is the Rear fan? Both fan are on the side of the print head from what i see. Please advice. Thank you.

Hi, thanks for your advice. I guess I misunderstand the manual. It says "Rotate the button until the nozzle is a millimetre away from the buildplate" and I take it as the screw under the buildplate which was in fact referring to the UM2 Rotating button." So now problem solve, thank you.

Subject : Ultimaker Robot by Aike Printer Setting: PLA Default Slice by Cura 14.03 Mac OS Link to the file: https://www.youmagine.com/designs/ultimaker-robot The print looks horrible, can anyone tell me why? Thank you. My Print: