Thanks for the tips, used all your settings, now after the first robot (well actually I had this problem prior to the printing of the first robot as well) is that material just isn't coming out of the nozzle, the head is moving as it wants to print, but nothing is coming out.
On the first occasion, I just gave it a little push and it started feeding the material to the print head and came out, had to do this procedure about 3 times.
Now I changed the material (Colorfabb's Traffic Red) and the problem is here again, when it purges right before the print starts, it comes out but curles up, so it's not flowing nicely down towards the print bed. But then it stops coming out at all...
Mind you when I set the settings back to Factory Settings and go through the leveling and material insertion process, at the stage, when the material should come out it comes out, with a bit of an upwards curling (sticking to the nozzle head), but it comes out nevertheless, however when I got to printing, it doesn't come out... weird.
Any suggestions?
Thanks
P.S. Thanks Don, indeed my Gallery was set to Private, silly mistake. Made it Public now.