david-ganon

i can not find some ninja flex in the sites you listed

can some one recommend on good and cheep filament supplier ? i live in Israel so i need him to ship the filament international thanks

it seems that the fan start working only when they get above 70-80% power. until then, they do not move at all. do i have a problem on my machine ?

can cura print all the model in a circular pattern, like the walls ?

thanks guys

can sameone tell me pleas what can i configure in the acceleration option in um2? can it make my prints faster or better looking?

and how???

i have problem with the temp. it is set to 0 evety time. how do i make it 210 by auto? and how to i control the first pla extrude in home position before the print starts? do i need to learn hoe to change the gcode? were can i find info about this? thanks guys

what should i configure in overhang? 0.08 layer resuution 50mm outer shell speed thanks.

what overhang should i write? 45/ 60 /30 ???

i do not now to write software. it is new for me. maybe in the future

hi guys, i was thinking: what if cura could give you the option to choose one layer height for the outer shell and different one for the fill and support. the resolution is very important for the outside of the model, but not for everything else. so lets say the head prints in 0.05 res the outer shell, and after 4 layers it prints the fill and the support in 0.2 res. it can do this !!! tell my what you think

the perfect support.

it is not completlly flat but the printing above the support is very Disappointing

my um2 work well, but i can not solve this problem: the layer printed on top the support is very ugly !!! and it seems the support break the lines printed above it. here some pic: thanks.

this part was in the left corner when i printed it. the head then move to print another part on the plate, and when it finished and move to home, it knock down the part.

hi, i am a student of industrial design, i got some feedback and idea about the feeder: the metal feeder eats the material, so i think that ultimaker should make it with rubber like wheel, and also add extra wheel that moved by the material, so the ultimaker 2 know the actual speed of the material and act by it. thanks for listening...

they should add speed for support only and material flow for support only when i printed with slow flow and high speed i got like spider web amazing support, but the model was the same :( it can do wonders !!!!

the head knock down my model when finish. the plate should go town all the way before the head move to home. thanks.

can i control the support speed or material flow separately? my support is too thick. and weld to strong to the model. thanks.

can someone point me to some tutorials or profile files for cura? i do not get the results i want from the printer yet. thanks.

thanks a lot :-P problem solved !

so i can not update the firmware i have win 8.1