Jump to content

cloakfiend

Ambassador
  • Posts

    2,015
  • Joined

  • Last visited

  • Days Won

    68

3D Print posted by cloakfiend

  1. British Bully split test

    Another bully sculpt, now I have American, British and French... was experimenting with zero retractions speed increases and the placements of the slice and how well they stuck together after. Doing a tutorial for the glueing, acetoning, filler and finishing for this. part one is done.
    model available now for download.
     
     
     
     

    353 downloads

       (1 review)

    0 comments

    Updated

  2. Another Thing

    Kmanstudios mentioned one of my last prints reminded him of the head from the 'The Thing' with the tentacles so as a result of not getting it out of my head I did a quick sculpt and ended up with this, have no idea why the two sides didn't join up correctly, but I admit i didn't pay attention to the settings when i did it and may have got the scale wrong when printing it as well. I guess I need to pay more attention when cutting up objects, but its good practice for joining two parts in a way to avoid seeing the seam!

    478 downloads

       (0 reviews)

    0 comments

    Updated

  3. Plate Test Girl no.2

    Just another plate test after thinning my paint seeing if it still works and cleaning my copper sulphate solution through activated carbon and filtering it after. Seems to work ok but still broke in a few places because I was very rough with the wire brush which i should not have really used and just stuck to the wire wool, but it was very difficult to get into the part under the hair... Patina stages also shown. Really like the detail in the hair.

    381 downloads

       (0 reviews)

    0 comments

    Updated

  4. Tigris Plate test

    Lots of pics...
    Just a quick attempt at acid plating on a failed model (split) after a break from it. but it failed because the copper I'm using is of a different grade than it should be and it just goes weird. Still learning here, just dug up my airbrush from 15 years ago and it still works!!! silver coated before electro bath and voltage was probably too high too. Im gonna try brush plating next. Due to the complete contamination of both copper and solution, a decent plate is not possible anymore but ill keep going till I get nothing.
    Gonna do a vid/thread later about this but i need to figure out whats going wrong first!

    377 downloads

       (0 reviews)

    1 comment

    Updated

  5. Happy cat

    Second test print, usual acetone method.

    374 downloads

       (0 reviews)

    0 comments

    Updated

  6. Zombie Friend

    Just a test to try to calibrate my settings to how they worked best for me. I thought my coupler was dying but it was just an end of roll issue before. Only dipped for 25 secs then sprayed, should have gone 35. Oh well next print next time!
    I used Citadel Codex White spray paint for those interested, Its one of my favs goes on thin and dries almost instantly. Shame its matte. I have others for a smoother surface finish but they take longer to apply. Ill do a comparison vid about that soon....next year..lol.

    676 downloads

       (0 reviews)

    0 comments

    Updated

  7. Friends face...again

    First test print since fixing my um2 numerous times... hopefully not for a while again. Usual post work.

    459 downloads

       (0 reviews)

    0 comments

    Updated

  8. American Bully

    A test sculpt of my friends dog.... still trying to get my UM2 back to spec. Didnt realise the 35W heater needed a PID alteration or something, but hopefully I'll have that sorted and will be back to making near flawless prints. No closeups here because they are not worthy of closeups.

    498 downloads

       (1 review)

    0 comments

    Updated

  9. Hair test subject

    Was going to use this for my galvanising tutorial as I modelled it to be tall and thin so that it fits into my beaker of copper sulphate, but my printer is not working correctly after a refurb effort, Im still currently trying to resolve the yo-yo up and down temperature issue as it causes quite severe lines on the surface of the model even though it looks OK from afar...... not touching the fan base, and sensor appears to be pushed all the way, will fiddle around for a while before I ask for help.....again, lol.

    373 downloads

       (0 reviews)

    0 comments

    Updated

  10. Mecha Dunkleosteus head

    Just a quick mess around to tst if my coupler is dead. And yes it is, lol. I wont be printing fpr a while, been needing to do some maintenace for a while now. Forgot infill as well! lol, surprised it didn't fail completely . Will do a rigged one next fpr fun, I really liked the skull of this fish had top make my own version!!

    490 downloads

       (0 reviews)

    0 comments

    Updated

  11. Carbon Freeze fun

    Just a fun quick over-extrusion mess around, i didn't spend long on this because i'm giving it to a mate(the guy in it) who is a starwars fan as a gift, and i dont think he'll care about the fingers, i may try it without over extrusion to see if the fingers come out better.

    1,184 downloads

       (0 reviews)

    0 comments

    Updated

  12. Alien face (failed print)

    This is an Alien face that printed kinda wrong for some weird reason, no acetone treatment yet, but i was really happy with the details especially the teeth. Should look great after a acetone bath!

    2,048 downloads

       (0 reviews)

    0 comments

    Updated

  13. Kalimaaa

    Got a few issues with my printer at the mo not sure what exactly. end of the roll old coupler or something else.....
    no cleaning done at all, just acetoned, so bits of pla here and there from the lack of retraction even though it was turned on?
    a fun job again.

    724 downloads

       (0 reviews)

    0 comments

    Updated

  14. Pinhead

    Classic Hellraiser character I always wanted make, not finished and not perfect, I think my coupler finally needs replacing!
    Over a hundred pins BTW, well annoying!!! and i didn't even do the back!!!

    628 downloads

       (0 reviews)

    0 comments

    Updated

  15. Bully Trophy from Bullseye

    Just a mock up of a Bullseye trophy minus the dart, only really found two pictures on the internet of it so but am fairly happy with it as it was just for fun. Fixing the messed up print on the other hand was not fun. I am very stubborn though, but next time I'm just gonna print the damn thing again!
    There was a hole in the mouth so when i acetoned it, it split because it got inside! the legs did not split. I also forgot to add the button in the splitter!! Oh well ill add them in the next one.
    Loads of pics to see the madness I went through just to finish it!

    788 downloads

       (0 reviews)

    5 comments

    Updated

  16. Groovy hand.

    A quick hand sculpt from a classic scene (i did the face as well but it needs work and i printed it at the wrong scale). might make it into a full prosthetic if i have time.

    1,407 downloads

       (0 reviews)

    0 comments

    Updated

  17. My work colleagues

    Havenst posted here in a while, but just a bunch of rough quick prints of the team of people I work with, all made with remake or memento or whatever, shame they discontinued the mac version as it was free! lol no more, will have to find a new quick method now. Photoscan is a lot longer than rekmake. Then sprayed with various undercoat brands of paint for experimentation. will post a few close ups if I have them as I've given all these to their respective selfs.

    1,069 downloads

       (0 reviews)

    0 comments

    Updated

  18. Painted 1986 Unicron

    I reprinted my unicron model because I felt like painting it, but seeing as I haven't painted minatures in like 25 years i'm not that good anymore the acetoning was also too much and it cracked after spraying for some reason, but it serves its purpose. will do one with led eyes and a battery next after some remodelling.
    ive been away too long and feel like i need to start over.....:(

    1,257 downloads

       (0 reviews)

    0 comments

    Updated

  19. Colossus from Deadpool sketch.

    A quick sketch from two stills, not quite right and no ridges, but still a good print, i dont mind sharing the model if anyone wants it ill put it up on youmagine.

    1,380 downloads

       (0 reviews)

    0 comments

    Updated

  20. 'The Thing' 1982

    My take on John Carpenters 1982 monster movie 'The Thing'. Was going to do The Prodigy Jilted Generation cover, but that was 90's and i wanted to try something harder....

    2,064 downloads

       (0 reviews)

    0 comments

    Updated

  21. Front cover recreation no.7..

    A comic book cover pose recreation minus the clothes and mic, lol but im still practicing.... clothes come later its an old print before i installed my ob and reprints resulted in faliure for some reason and split in many places during my acetone treatment. followed by the usual treatment of plating afterwards that i always do.

    1,915 downloads

       (0 reviews)

    0 comments

    Updated

  22. Evil Queen

    A favourite of my latest print tests. Really enjoyed distressing this one, was going to buff polish it, but left it like this because I liked it so much. I can always polish it later if need be!

    1,693 downloads

       (0 reviews)

    0 comments

    Updated

  23. Tigris of Gaul

    Sorry for the lame photo, but I demolished this one experimenting on it a few hours later, lol. Obviously from the Gladiator movie, not perfect but you get the drift. Might do a moving version, if i have time, but this one is all one print, no gluing or construction.

    1,203 downloads

       (1 review)

    0 comments

    Updated

  24. Groovy hand mk2

    A hollowed out revised version of the groovy hand now mk2 with details removed to see what it could look like, almost finished the enable version which is basically just new fingers and a revised raptor reloaded main hand. Making cool working hands with fingers and even the prosthetic ones is very time consuming and difficult due to all the joins and width limitations i'm learning a lot of things on the mechanical side of things which is interesting, I had to compromise a lot compared to simple sculpts. The pinky is overlapping in this print but I threw a patina on it as it makes it look older and cooler in my opinion.
    Another Colorfabb Dutch Orange for those interested. printed with 0.8 shell which is my new norm compared to 1.2, and hollow with supports. pics above.

    1,674 downloads

       (0 reviews)

    0 comments

    Updated

  25. Aliens 2 Marine Spacecraft

    A modified model i pulled of the web, very bad in terms or polygons, and i had to drop two guns, and there are a few holes as well, but apart from that i am quite happy.

    1,560 downloads

       (0 reviews)

    0 comments

    Updated

×
×
  • Create New...