rebekah_harper
-
Posts
324 -
Joined
-
Last visited
-
Days Won
2
Content Type
Forums
Events
3D Prints
Posts posted by rebekah_harper
-
-
just to show where I am at.
-
well it's on the JPEG and it's new to me too. and without some guide to error messages or clickable error message to find out more so I can resolve the issue, I have no idea.
-
It's annoying to be honest.
it's like the error on the printer that leads to nothing, go to web page and it tells me nothing..
for some reasing I have nothing in my que, nothing on the printer. simply put there is nothing going at all. nothing sent and the que manager doesn't load up. although cura says I am connected to my printer I can't get to it through web browser using IP address.
-
add the X3G plug in too.
-
new 3.5 should do.
has wanhao 4s as one of the printers
-
Hiya all,
just wondering what on god's green one is "sending new print jobs (temporarily) Blocked...." meant to mean. is there an idiots guide that explains this?
I am connected to the printer with 3.5.1
Cheers guys and gals
-
wow guess Cura 3.5 bombed lol.
im confident the team is all over it like tramps on chips.
So I hop that 3.51 will be only about bug fixes and ignore any new features or experimental ones.
GO TEAM! ?
-
4
-
-
44 minutes ago, Brulti said:
I fully agree with this. There are many paying softwares out there that aren't better than their free counterparts.
True but I’ve gone back to S3D as for some reason, with similar settings, I can’t get results with ABS X. But with S3D they are border line perfect.
I have no idea why this is. I am using bond tech QR mods but shouldn’t make a difference.
But it I am truly gutted. I’ve not used S3D for about 2 years.
-
hiya,
could some one provide me with the link ot the Firmware download page for the UM2+ please. am having issues connecting over usb.
many thanks
rebekah anderson
-
Outside warranty so it would cost me.
It’s not static I knew that and now I also know why.
as it always seemed to be when the cores were heating up I checked at the print head. Well it looks like the braided wire has frayed and some of the wires that go down to the block were sticking out and potentially touching the bar.
So I used some black insulating tape and taped up any of the wire.
Boom solved. No longer doing the electric boogie lol.
looks like I’m buying a new cable. ?
-
Hiya,
has any one been electricuted by their printer.
I ask this as I am getting shocked by my UM3.
rebekah
-
Hiya,
I am wondering why I keep needing to override the material setting.
on the UM3 I install ABS. I then set up Cura slicing with ABS Orange. I then print over network but I have to go to the online monitor in order to override the material. when I click on the override it states I need to change the material setting on the printer from ABS to ABS Orange.????? There is no ABS Orange option when loading material so how can I???
this is not using custom material profiles this is using the Ultimaker Profiles.
Any chance this can be looked at as it's annoying as F. and a major disconnect between Slicer development and Firmware development.
Many thanks
Rebekah Anderson
-
1
-
-
Hiya all,
I have been printing with the Bondtech upgrade on my UM3. I strongly believe that the 492steps/mm change is not correct.
i get under extrusion and when I do a manual move material of 100mm it's not enough.
has any one experienced the same ?
Rebekah Anderson
-
Hiya,
just to add to the list. when I change one of most of the settings I don't get the Prepare button, it remains with 'print over network'.
I have to adjust the quality layer height to get the button to show.
Bex
-
2 hours ago, ahoeben said:
Just get a Raspberry Pi, or a starter kit (eg https://thepihut.com/collections/raspberry-pi-kits-and-bundles/products/raspberry-pi-3b-plus-starter-kit)
Then install OctoPi on it: https://octoprint.org/download/
Note that OctoPrint is not a requirement for using the Z-Unlimited. Once you have done the conversion, you can print as you have always done (it will just take longer and result in awesomer prints)
Hiya,
that I am aware of however I need the portion to monitor the print and some control as I am not going to sit with the printer for 2+ days lol plus pause it if I need to.
cheers for the links ?
-
Oh ok, in the US they sell full ready to roll setups.
Will see what I need to do then ?
-
Well that’s me in, paid up and now the waiting game ?
just trying to find a UK supplier for Octoprint. ??
-
1 hour ago, ahoeben said:
I have one. It is pretty complete.
Is that the geared stepper aswell?
i went through the list of what was needed and it was extensive as to what you need to buy to complete it.
-
This is true.
but the z-unlimited isn’t a complete kit. It’s just the frame work.
did check it out but couldn’t find all the parts needed to complete the mod.
-
Hiya everyone,
i was was wondering were I could get custom made from side and back for a UM2+.
nit looking for looks I just want to have a significantly taller version of my UM2+.
the aim is to print 900mm tall parts.
many thanks
rebekah
-
Yeah they took it out.
but I’m seeing a need for it now.
I found that possibly because ext2 is spring loaded that when you’re trying to find the same pressure on the card that a small amount of it is absorbed by the spring hence it’s slightly lower.
-
hiya all,
I was wondering if it's possible to get the z-calibration option back.
I have found myself needing to re-calibrate the Z on ext 2 but have to go through the whole process again and again. I don't know why but for some reason I can't get the height right first time round. I do all the right steps but always seems off for some reason.
many thanks
rebekah
-
Hiya,
I was wonder why when I have ext1 set for brim, that the first layer for the support on ext2 gets printed after layer 2 of ext1.
In effect it misses the bottom layer of the support. this causes adhesion to build plate issues.
many thanks
Rebekah
-
hiya,
when you say USB, is that cable or card? if cable and using win10, it never worked for me. if using cable with USB 3.0 also doesnt work.
Have you checked the flavour in the setting in cura. should be griffin.
just somethings I've come across
-
1
-
New: Ultimaker Cura 3.5
in UltiMaker Cura
Posted
well I am not getting it at all.
I know the team is decent and not a bunch of clowns plus with a lot of outside support.
I am surprised and getting frustrated.
just to add a little more to the mix. some printer profiles are representative of the actual printer.
the main one is WANHAO D4S, this is a dual extruder printer but the profile is a single extruder. There is no way of changing the number of extruders that I can find on the machine settings page. so how can a dual extruder printer work with only a single extruder profile. ??
My interest is that I am helping a friend of mine how has my old Wanhao and I recommended 3.5 but am looking a bit of prat now. ?