Gigi
-
Posts
133 -
Joined
-
Last visited
-
Days Won
1
Content Type
Forums
Events
3D Prints
Posts posted by Gigi
-
-
The best way, is to be able to set the static IP, the same way you do for a computer.
I don't know if the firmware is capable to do so.
But only if you want to.
For example my UM3 had choose 192.168.1.6 (ok for me)
-
-
https://ultimaker.com/en/stories/18361-using-ultimaker-3d-printers-for-manufacturing-at-siemens
"To do so they found a specialized foundry based in Sydney, who take the component 3D printed in PLA and place it in a wax form. This form is dipped in a ceramic slurry and left to harden. The PLA is perfect for the next step, as during the firing stage the PLA is completely burnt off. The result is a cavity mold that they can directly cast steel into."
-
-
Anyone tried this filament ?
For ultimaker possible use they have 2.9mm filament.
And is a problem 2.85 - 2.90 ?
-
I would have to change the spring ?
Bought my UM3 on 26 november 2016
-
Is about UM3. Thanks
-
3 spring of the bed, they're the same ?
I had to disassembly the aluminium plate because it was a lot of dirt beneath .
-
https://ultimaker.com/en/community/37577-printing-from-polycarbonate
https://ultimaker.com/en/community/35928-can-the-um3-print-polycarbonate
Bed adhesion : glue stick from kit, and a wet paper towel to spread it.
Support: Raft is mandatory.
Bed temp: 107 C (from Cura Polycarbonate profile)
I have printed without door. If you have it is better.
Also in Cura 2.5 is a button to preheat the bed before start printing.
-
-
-removed second video link-
- 2
-
-
-
-
-
Gesundheit!
You think PVA is better than HIPS for support ?
-
Possible in the future ?
-
Already did that
-
Error handling is the cornerstone of any programmer.
So, no. Is not ok to cut power.
PS. Also for manual leveling, an option for abort will be useful.
If something is wrong during leveling, you have to do the procedure till the end.
- 1
-
I asked, because it seams maybe will have a ruby nozzle for Ultimaker 3 by Olsson.
-
Clicking are from Z axis.
It is about active leveling ?
It is trying to compensate ?
-
It should appear "Abort" option.
- 1
-
The build plate is
taking too long to
warm up.
Message on the LCD when trying to print with PC (ultimaker).
No way out.
I had to stop the printer from power button.
-
Bed leveling how to get the bed really level
in UltiMaker 3D printers
Posted
Credit card 0.8mm
CD 1.1mm
UM card 0.2 mm