marcottt
-
Posts
76 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by marcottt
-
-
no... i need to print 1 real object (with 2 material) but for a BUG of Cura, i print a dummy object about 20x20x0.3 mm with 2nd extruder because cura did not clean 2nd extruder on fist layer.... So i need to print the dummy object before the real object.....
In my case cura seem to print first the object nearest to the center of bed. -
maybe but i have a delta with circolar bed... maybe cura usa a different analysis with delta printer. Anyway i wrote about multi-object printing one at time, not understand about layer order (or you wanna wrote object and not layer?) .
marco
-
Hi all, i have same problem with cura 4 because cura has a "feature" (for me is a big BUG but....) where the 2nd extruder is not primed in first layer... but i have a 2-in-1 configuration (2 extruder , 1 nozzle) so i cannot work in this way because when start 2nd material on 1st layer, the nozzle is dirty from 1st material. So i check a way to print a "dummy object" with 1 layer height with material2 so i can clean nozzle.... but cura print real object before the dummy object (useless.....) .
I read this post... for me the "scan line" did not work... maybe because i have a delta with circolar bed.... but i find a way... in my configuration the "scan line" start from center to external... so i put "dummy" objet in center and "real" objetc near.....
Is a very big problem fro me because my bed become HALF!!!!! but it seem to work..... -
i'm making some test with dual extruder and i wanna try cura.. i just made another topic for suggestion about start-stop extruder script , but i see a problem with prime tower, when print start it made a 2line skirt (red) , then an useless base of prime tower with materal1 (red) , then print (correctm, red) and after it made a 2nd material (white) single skirt line (why??) and after start print white without prime material on prime tower. After this start 2nd layer and seem to be ok... but 1st layer (the layer most important) is wrong....
in the image you can see the prime tower red (fist materal) but you can see NO WHITE material in prime tower (and i need it... white is 2nd material so i need to clean from red)....
-
Hi all,
i wanna use again my 2 in 1 delta, but now i'm using cura 4 and not understand what i need to script for start and stop of every single extreuder, there is some sample to use and modify ?
because someone put T0 or T1 in code, other move head in start e back in end script.
Also, when printer start will execute also the start gcode of extreuder1 ? (after the general start gcode i suppose)thanks to all, please give me some example .
marco
-
did you find a solution ? i have similiar problem
-
Not with cura. Repetier host for example.
Maybe better with wifi enabled sd cards
-
move file .gcode from pc to usb to sdcard is possible.... but SLOW SLOW..... useless...
-
no exatly answer to yo but maybe help. for better stability on high support, i use 2 o 3 perimeter on tree support.
maybe 3 permeters can help you ? -
How i can migrate a profile from 4.0.0 to 4.1.0 ? I create 2 profile in 4.0 but how is possible cura 4.1 cannot use it ? Also if i create a new profile, how to add a stl of my printer file to see printer and bed inside the preview windows.
backup from 4.0 seem cnnot be used in 4.1 .... why ? are so different 4.x profile ?
i'm a bit confused.... seem ultimaker create useless problem and not solution......
-
35 minutes ago, ahoeben said:
The sidebar plugin will always have to be updated for new versions of Cura. It "patches" specific parts of Cura, and when Cura is changed those patches don't work anymore and have to be redone.
I do think there are still good reasons to prefer the sidebar implementation over the floating panels, so I will release an updated version of the plugin at some point, but there are some complicating factors at the moment.
Please please make plugin for 4.1.0. New gui if possible is more stupid than 4.0.0....
I'm really do not understand how is possible someone think is a good gui. Is also very slow but I think you cannot solve it....
-
But is now ok also for 4.1.0?
-
please @ahoeben be fast. Ultimaker maybe great for printer, good for slicer (4.1.0 update forget ALL my settings....) but for GUI are very bad.
4.0.0 was very stupid gui (and SLOW).... made 4.1.0 optimal is very simple.... 4.0.0+sidebarguiplugin+FAST.... and what is 4.1.0 ? another stupid SLOW interface with a window overlap "slice" button and layer slider....
But they make cura slicer at work and then home use simplify3d for own printer ??? did they tried to use ?mah.....
-
update from 4.0.0 stable to 4.1.0 deleted all my setup, printer and material.
i did NOT remove my setting during uninstall of 4.0thanks.
-
i think to have find a BUG, when i use 2 material (1 nozzle with Y bowden) on my anycubic kossel plus (marlin 1.1.9) option to "print sequence" (the way to print 1 object completly then another) disapper... why ? i think is becasue i must use 2 prime tower in this way ?
BUT
This appen also when anyway i use only 1 material.... for example only material from extruder 2... (i have 2 different extruder motor 1 mk and 1 bmg dual....sometimes 1 is better than other)
-
just tried with cura 4, i think work perfect (not tried because not printer here, only generated gcode and find several m117 in right point). thanks me also cannot find a way to install...
-
Hi all,
there is a way with cura 4.0.0 for display a message like "printing layer x of y" ?
i find a plugin but seem pretty old.... Any new plugin or solution ?
thanks
marco
-
7 minutes ago, JCD said:
I have no information on your exact dimensions and so on but take a look at
Support X/Y Distance (get it visible if not) and try to put in it a greater distance (1.5mm)
This will prevent a support to be too near from the object on the x and y axis, as it appear to be in your problem
i'm on a 12h print, after i'll try.
the part in my image is:
https://www.thingiverse.com/thing:3409714if someone wanna try. I'll check later
-
i tried but did not work... did not stip in that point the support. In a "normal" support point it work.
I think is related to the holes... but cannot find solution.
-
-
Hi, i see this problem also in other slice, in cura sometimes there is support column when no need, this is an example:
in this case the problem is the stringing effect between the real 3 part and the "no need" support column between... How i can manage this?
I got same problem also with other part, in similar condition, 2 hole near each other but i do not want cura make it, it useless. -
20 hours ago, ahoeben said:
In that case I did not understand your question. I though you did not have a buildplate model at all.
no problem. in this way is better because i see the printer display panel so i can rotate part to better view print from my chair
-
-
Sorry for my English
I mean, in the interface I wanna have not a simple round plate (I have a delta printer) but I wanna import an stl of my printer to have an eye of printed part inside.
This is useful for better understand position of objects from my eye, to better rotate It and see difficult printed part better.
Cura plugin for single extruder multiple color
in UltiMaker Cura
Posted
did you tried to simple put an M600 command at correct line ?
with mine printer (same as your) worked. (time ago now i have 2 extruder)