marcottt
-
Posts
76 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by marcottt
-
-
Hi all, there is a way to put stl file in cura to have on screen object inside printer? i use it to better understand orientation.
thanks
-
any info about moving from beta2 to stable ? need to change or remove something ? will mantein configs ?
thanks
-
you need to install side menu plugin . is this from first beta no one understand why they choose this layout.
-
i'm using freecad, yes try to male "part union" before stl export, often you get a different (normally better) result.
i made in this way: save project, make union, make stl export, close without save project
-
I see but I don't see any solution. I'm wrong?
-
yes i made similar. but i think my idea maybe useful
-
i think have find a little bug: if you have cura 4 beta 1 and sidebar installed, when you install beta 2 and keep configuration, the slicer slide (the slider where there is the number with layer to investigate slicing result) disappear (i think is behind the menu).
You need to remove plugin, when restart and install plugin from market. -
I think maybe a useful option make a spiral skirt, because ofter when print start the nozzle is dirty and blob, and the dirty often go to bed when it touch but after the 1st round, the nozzle go close to the starting point and collect the dirt and the blobs.... i think if i can make a spiral skirt so it make 2 / 3 round (as usual) but with every round ranged of about ... for example... 5 mm it maybe a great option.
what do you think?
-
same issue.. did you find solution ?
-
i have a bit different issue, then the part are in same color for more layer (for example, red), cura every layer go to prime tower, use grey color, then red color (a bit, not enought to clean) then go to the object with dirty red..
-
i have sam problem , you can check here:
is strange, i don't think is so difficult to manage this, cura made other implementation more complex (i think.)
-
4 hours ago, alexjx said:
I think this behavior started at 3.6. I had a hard time understanding it too. But it makes sense after you realize if two material interleaving with each other, the adhesion tendency will not as strong as one. So Cura chooses to use one material always printing a shell for the tower, so it will not break during print. For support materials like PVA, this makes sense, and for dual color prints, for most of the time, each layer will have two colors so it also makes sense. The only problem is where things like a traffic cone, which different colors printed in different layers. I think this is a small price to pay...since the original behavior is to print different colors alternatively in each layer. And in this case, it will make the tower even weaker.
Hello, sorry but in this case it is a big problem, because after having done the normal red layer, it starts to purge with gray (and this is a waste of time and material ...); at the end red charge again but the red purge is too little and not enought and therefore the print is dirty with gray.
It seems strange to me that Cura manages to do much more complex things and can not handle this thing. -
I have a problem with prime tower.
i made a test with the simple traffic cone, with 2 color red and grey.
When i'm in the red zone, the prime tower still make a huge use of grey material, and (another problem) after it use a small and insufficient area of red to purge.
why this ? and also why prime tower of 20x20 mm is more or less empty ?thanks
-
just found is out cura 4 beta 2. How to have notification about new release ? the checker inside cura 4 beta 1 tell nothing about...
-
oh yes, was the primary feature for tried cura.
-
oh i find it.... but it change my object !... not sure when useful this thing....
-
hi @ahoeben, sorry... i not understand which is. can you please more detail or make a pic ?
thanks for you help
-
4 hours ago, ahoeben said:
What happens if you turn off supports?
nothing, no support at all.
i think this option is to make support not really vertical but inclined with an angle...
-
i'm makeing some test with this option, but i cannot find how to enable in cura 4 beta
i tried this:
-
HI all, any info about new beta release and/or stable release ?
i hope will be a really usable "manual manage" printer tab, like repetier host for example, to move material, change, clean, ect etc before launch printer... Also please add MANY customizable button like repetier-host (but more... 10 for example) or pronterface.Also i find some problem to arrange multiple object on bed... because i don't need to arrange really but only to drop on bed with correct face (see simplify3d fro example) but not arrange XY position...
also.... editing support... native way not the plugin ... did not work well...
-
i made this video for support, but trianglelabs did not answer anymore.
Aliexpress refound me, but i prefer to have extruder work....
anyway, see it...
https://youtu.be/96d6NT9LaA0thanks
-
10 hours ago, ultiarjan said:
you get what you pay for, dimensional accuracy of Chinese clones can be terrible... it does not have to be... but its a risk for sure...
Yes maybe.
But this is a small hobby for me, I don't want to spend too much
-
On 2/8/2019 at 7:17 PM, bondtech said:
Contact Trianglelabs support? I am sure they will give you the answers you are looking for.
Support from trangelabs is nothing. They only say some stupid things to get 15 day warranty time.
They say to ask to bondtech.... But this is a clone I don't think bondtech answer this....
-
HI, i see this a pretty old tread but i try.... just buyed trianglelab Bowden Extruder BMG extruder Cloned Btech Dual Drive Extruder from trianglabs, put at 415 step/mm, on my anycubuc plus printer.
For normal operation extruder is very good, but i cannot move material at speed higher than 75mm/s becasue bad sound and block... seem like gears did not like speed or motor cannot do 5 times spedd than standard (default are 90step/mm).
Did anyone some ideas ?thanks
Marco
how to replace model printer on screen
in UltiMaker Cura
Posted
no way ?