ednewbold

I'm asking precisely BECAUSE "this is a 3 year old topic and unfortunately some of the old links here don't work anymore." Perhaps the links should be updated every now and then, like at least once per year? "If you want some explanations of how to use cura you could start here maybe: https://support.makerbot.com/s/topic/0TO5b000000Q4utGAC/ultimaker-cura" This is exactly why I asked about the link to begin with. THANK YOU. Regarding youtube, is that now your goto "support channel"? Naw, I don't think so, becuase every youtube video regarding Cura slicer has the writer's personal OPINIONS in them; not factual statements from Ultimaker Cura. Many times the information presented is either incorrect or outdated (too). That's it for now. Thanks for your time.

??? What's this all about? We're still looking for the site that contains "Cura Settings Explained." Thank you.

Can't reach your site:

How do I change the Default Temp for generic PLA in Cura 5.3.1? I have an FLsun v400 and need to up the temp a little for both the material and the bed. Thank you.

Where is the Marketplace so I can find that extension also? Thanks much,

Sorry, but https://support.makerbot.com/s/topic/0TO5b000000Q4wVGAS/using-ultimaker-cura does not explain "Cura Settings". There is evidently no general support document available that explains the hundreds of Cura setting available. I did find a somewhat helpful site here that briefly covers some aspects of Cura: https://makerspace.ccny.cuny.edu/assets/pages/Ultimaker_Cura.pdf but not a comprehensive user manual. The best info I've found so far is here: https://all3dp.com/1/cura-tutorial-software-slicer-cura-3d/ which is about the most in-depth help on Cura I've found. Cheers, Ed Newbold

The link to Cura settings explained. is not working. Error code is "support.ultimaker.com" Host Error. Cheers, Ed Newbold