acray

Yes, thanks makes sense and since I was looking at the bed leveling which had one layer it did not have another M106 command to turn the fan on. So by default without the additional parameters it seems it turns the fan on after it makes the initial first layer. I think I will change my settings to turn the fan on after the 1st layer, by setting the "Regular Fan Speed at Height" variable to 0.2 mm.

Having no fan issues as well. The fan was set to 95%. I tried fan 0 and fan 1 in the machine settings under extruder. This did not work as I searched of the M106 command in the gcode. The only M106 was at the end and it was to tun it off. The only other fan command was M107 at the beginning of the print which is to TURN FAN OFF!!. I added more fan speed settings to the setup, see below and now my code as the fan on command to 95%... seems like an issue with the Cura. Before: After: What I added to Cura make it insert the M106 command: