Jump to content

Heated Chamber Error


Schweppes

Recommended Posts

Posted · Heated Chamber Error

Hi everyone,

Here is the issue.

20150830_022724.thumb.jpg.4e3576ea81d96dee92b2e563dbb82fd7.jpg

I build an Heated Chamber / sound isolated box for my Ultimaker Original +.

After 5 hours of printing. My printed object became a mess.

The chamber becomes actually pretty warm and i do not know what to do about it because i am a noob.

Has someone any suggestions??

Should I close the heated bed or add extra van? Do i need to tweak the settings or is it because of my bad bed-leveling build platform. I want to keep the Ultimaker in the heated chamber.

Here are the settings that i use for printing.

Untitled-2.thumb.png.c6a3bfa70cb3ffb752e53db67194fd82.png

20150830_022724.thumb.jpg.4e3576ea81d96dee92b2e563dbb82fd7.jpg

Untitled-2.thumb.png.c6a3bfa70cb3ffb752e53db67194fd82.png

  • Link to post
    Share on other sites

    • 3 weeks later...
    Posted (edited) · Heated Chamber Error

    Im no pro so ill just chime in having the same model as you.

    I use a brim with PLA and is has always seemed to help with bed adhesion. If I remember correctly PLA is not a big fan of heat chambers and that might be something more for ABS. In either case it would be a good idea to make sure the chamber is regulated evenly. You may not need a fan just simply a vent so the heated air will not continue to stack on itself and make the camber hotter than you need.

    If I where you I would try another print then take some ambient temperature readings with thermometer.  Something that can reach over 100c would be a good idea. Then adjust your vent to get a good level temperature. Im guessing anything above 60c will not work well for PLA but maybe one of the Pro's can chime in on this.

    Edited by Guest
  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...