Jump to content

POP-UP Ultimaker PrintLab HUB at 3D Printshow Paris


SandervG

Recommended Posts

Posted · POP-UP Ultimaker PrintLab HUB at 3D Printshow Paris

During the 3D Printshow Paris Ultimaker joins forces with 3D Hubs and create a special pop-up 3D Hub. There is no separating that Dutch connection! We made 6 Ultimaker 2’s available for the entire duration of the 3D Printshow Paris. The Ultimaker 2 has been dominating the 3D Hubs trends for some time.

Ever wondered what that print quality is like?

This is your chance to get your hands on a very first print, made by the Ultimaker team themselves. While you are at it, come and say hi!

How?

 

  • Order your print at the Ultimaker Printlab Hub
  • Or, send an email with a .STL attached to 3DPSLab@orders.3dhubs.com
  • Use coupon code ‘3DPSLAB
  • Pick-up your print at the 3D Printshow

 

Use the following promotional code to get a free sample: ‘3DPSLAB’. If you are a visitor of the show and you don’t have a file with you, you can browse through Youmagine and send a file directly to 3DHubs. We’ll have a laptop available at the hub.

YouMagine.thumb.png.b1389c1200140cfce8ff7147296bf256.png

It you don’t have your own design, there's plenty of cool designs available for free at Youmagine.

There's a direct integration with 3D Hubs so you can just hit "Print this on 3D Hubs" to get going!

We’ll bring many different colours of PLA, so get your geek on! This pop-up 3D Hub will be live till October 17th.

If you already bought a ticket for the show you have a chance to talk to the most popular 3D Printer manufacturers, artists and other industry affiliates. And to top it off you can now get a free 3D printed sample too. Just bring your file and we are ready to go.

Looking forward seeing you on the show!

YouMagine.thumb.png.b1389c1200140cfce8ff7147296bf256.png

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...