Ninja Flex at start of print

[BlakeBBB 0]

Hi i am using the default extruder for um2 and at the start of the print the printer forces material trough the head and that seems to be the point at witch it jams any way to disable the forcing of the material at the start of the print

[Labern 775]

Just pull it back a bit before you select print. The feeder motor will be off so you can pull it back.

Its a difficult material to print with and will require a bit of playing to get it to work.

[Labern 775]

If i remember correctly, you can change the distance in Tinkerware fimware. Its great firmware.