Jump to content

Sourcing Bushings and Rods


XYZAidan

Recommended Posts

Posted · Sourcing Bushings and Rods

Hi,

I need to replace a Y linear rail and a sintered bronze bushing on my Ultimaker Original+. In the manual, it says the part numbers are 1011 for the linear rail and 1056 for the bushing. Can anyone help me find where I can buy these parts?

Thanks

  • Link to post
    Share on other sites

    Posted · Sourcing Bushings and Rods

    You should be able to buy them at your reseller. Just drop them a mail with the part numbers.

    Also if you read the github pdfs you can check the size and buy them at misumi or igus. Just google 'misumi igus neotko ultimaker' since I did wrote about. For igus part numbers I think this are correct: https://ultimaker.com/en/community/19229-gt2-upgrades?page=1#reply-133669

    Anyhow if you have access to a business you can order from misumi also: https://ultimaker.com/en/community/17068-making-your-own-ultimaker-what-not-to-buy-on-china-stores-personal-experience?page=2#reply-133667

    I don't know which it's cheaper. But, just never, ever, never buy them from a ebay/china, you will end up with very bad banana shafts (been there done that).

  • Link to post
    Share on other sites

    Posted · Sourcing Bushings and Rods

    You should be able to buy them at your reseller. Just drop them a mail with the part numbers.

    Also if you read the github pdfs you can check the size and buy them at misumi or igus. Just google 'misumi igus neotko ultimaker' since I did wrote about. For igus part numbers I think this are correct: https://ultimaker.com/en/community/19229-gt2-upgrades?page=1#reply-133669

    Anyhow if you have access to a business you can order from misumi also: https://ultimaker.com/en/community/17068-making-your-own-ultimaker-what-not-to-buy-on-china-stores-personal-experience?page=2#reply-133667

    I don't know which it's cheaper. But, just never, ever, never buy them from a ebay/china, you will end up with very bad banana shafts (been there done that).

     

    I looked up those part numbers on IGUS but was unable to find them. Can you provide me with a link? Sorry.

    Thanks

  • Link to post
    Share on other sites

    Posted (edited) · Sourcing Bushings and Rods

    Maybe they changed the part numbers. I bough all that almost a year ago. I would just call them by phone, they have a decent telephone support/sells line.

    Edited by Guest
  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...