Tutorial?

[thevictor11 0]

After using Cura for the past few months I decided to take advantage of the Netfabb license I bought with the Ultimaker.

My problem is I have no idea how to use Netfabb. I was following the "guide" on the Ultimaker support http://wiki.ultimaker.com/NetFabb_Setup_Guide_and_Quick_Introduction#Backup_old_profiles_.26_cleaning_of_old_versions but I feel like it isn't up to date because I get to certain point and I can't follow it anymore because buttons and labels aren't the same. Is there an up to date tutorial for this?

Thanks!

[owen 19]

Hi Victor

I don't know of an updated tutorial.

Apparently one is on the way since the last update.

I'm looking out for it myself as I can't work out how to put the settings in for destringing.

This is the link to Netfabb which may help you. http://wiki.netfabb.com/Engine_for_RepRap

It just isn't up to date there last time I looked.

This link to a thread on this forum may help you http://forum.ultimaker.com/viewtopic.php?t=1009

Plus maybe some other threads from blue bot (Paul) http://forum.ultimaker.com/memberlist.php?mode=viewprofile&u=61

[thevictor11 0]

Thanks again for the help Owen! I'll have to go through these tonight