Jump to content
Ultimaker Community of 3D Printing Experts
BIGLiLDESIGN

Ultimaker 2 with E3D Extrusion Upgrade Kit (USED) - Orange County, California

Recommended Posts

I'm selling a used Ultimaker 2 (UM2) for $1,300 USD. Please refer to the photo and information listed below:

Note: Ultimaker no longer sells the UM2 but you can still research the upgraded version, Ultimaker 2+ on this link. Ultimaker upgraded the print head/fan mount design, and extruder. Go to this link for more info: https://ultimaker.com/en/products/ultimaker-2-plus

- Machine on for: 1163 hours / Printing: 770 hours / Material: 686 meters

- Installed E3D Ultimaker Extrusion Upgrade Kit (purchased from MatterHackers for $220): https://www.matterhackers.com/s/store?q=ultimaker%202%20upgrade%20kit

Note: this upgrade is equivalent to Ultimaker's own upgrade kit that turns an UM2 into an UM2+.

- Includes 6 additional brass nozzles in various sizes - refer to a couple of photos of these nozzels. All 6 have never been used. This UM2 currently has 0.4mm nozzle installed.

- Includes 4 new ColorFabb nGen 3mm  filament (light gray x2, dark gray, and black for approx. $39 per box) plus a spool of ColorFabb nGen light gray already inserted to the machine (refer to photos): https://www.matterhackers.com/store/3d-printer-filament/colorfabb-black-ngen-filament-3.00mm

- Everything works but needs fine tuning around the X/Y axis and belts. This Ultimaker 2 would be great for tinkerers that already know how to troubleshoot 3D printers.

- Also includes 4GB SD Card, grease for Z rod, sewing machine oil, user manual, power brick, and filament spool holder.

Please contact me if you're interested. I would prefer if the interested buyer resides in Orange County or in LA County. I recommend we meet at a coffee shop so I can plug in the UM2 and do a test print for you. This way you can see that the machine still works and fully operational.

IMG_3044_Edit.thumb.jpg.ecda234d813a957cf40f6b94ca7410bf.jpg

IMG_3044_Edit.thumb.jpg.ecda234d813a957cf40f6b94ca7410bf.jpg

Edited by Guest

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Taking Advantage of DfAM
      This is a statement that’s often made about AM/3DP. I'll focus on the way DfAM can take advantage of some of the unique capabilities that AM and 3DP have to offer. I personally think that the use of AM/3DP for light-weighting is one of it’s most exciting possibilities and one that could play a key part in the sustainability of design and manufacturing in the future.
        • Like
      • 3 replies
×

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!